Xinkai mobile toilet special deodorization stainless steel toilet

  Xkd-812 stainless steel odor proof squatting pan xkd-812 stainless steel odor proof squatting pan has a water trap to prevent odor

Xkd-812 stainless steel odor proof squatting pan with trap, or there is a trap in the sewer
This is mainly to serve as a water seal, otherwise it will stink

If the trap is installed again, the height of the trap needs to be 30cm, the height of the squatting pit is 25cm, and the height after all installation will not be less than 50cm
In this way, you need to make two steps to go to the squatting pit, which seriously occupies the space of the bathroom
To install a squatting pit with a trap, you don't need more steps, just take one step
1
The working principle of the trap is to use the corner to form a & ldquo; Water seal;, The water that can be stored plays the role of water sealing and odor isolation, and prevents the odor backflow of the sewer
The squatting pan without trap has a straight through structure, and the smell is easy to return
The general size of squatting pan trap is: length: 585mm * width: 470mm * height: 296mm

2
Generally speaking, a trap will be set in the pipeline laying of the building itself
The built-in trap of the squatting pan actually gives a double-layer insurance to prevent the return of odor

3
The ideal height of squatting pan with trap should be 250 & mdash& mdash; In the range of 280mm?? The squatting pan shall reach 300 & mdash& mdash; 320mm。 This size range includes the volume depth and backwater height of the squatting pan (the diameter of the water outlet determines the total height of the backwater bend)
The standards adopted for these two depths (Heights) are not as high as they want to be (thin)

4
What if the squatting pan with trap is blocked? This depends on whether the blockage is serious or not
If it is not very serious (the standard is that the water can seep away quickly), there is a kind of toilet plug on the market, which is soft plastic
Cover the pipe orifice tightly, add water to the toilet tank properly to seal it, then press down the deformation and pull it up with air pressure
Generally, it can be dredged once or twice; If it is serious (the standard is that the water basically does not seep away), it is necessary to use the pipe to dredge the pipe, and rotate the other end by hand, so as to pull out the things blocking the pipe

After reading the above introduction, do you have any new understanding of squatting pan with trap? Do you think the squatting pan has a trap? The toilet is usually narrow and the ventilation performance is not good, so there are requirements for the odor prevention performance of sanitary ware
The trap of squatting pan has such a similar function