Wholesale of vacuum dough mixing machine manufacturers

  In the process of using the vacuum dough mixer, the belt and chain of the vacuum dough mixer need to be adjusted properly after a long time of operation
How do you adjust the belt and chain of the vacuum dough mixer? Please see the following: 1
Adjustment of the vacuum dough mixer belt and replacement of the auger drive belt: loosen the screws on the rear cover plate and take down the cover plate
Loosen the fixing screws on the cover and lift up the cover
Use a wrench to tighten the belt adjusting screw to move the motor backward until the belt is properly tightened
When changing the belt, use a wrench to tighten the belt adjusting screw to move the motor inward until the belt can be directly taken down by hand
Readjust the belt after replacing it
Do not pry the belt with a screwdriver when removing and installing it, otherwise the belt will be damaged
After that, cover the machine, install the back cover, and tighten the screws
2
Adjustment of the transmission belt and transmission chain of the vacuum dough mixer adjustment of the transmission belt: loosen the fixing screw of the machine cover and lift the machine cover upward
Loosen the fastening screws of the drive shaft bearing seat, screw the front and rear adjusting screws of the bearing seat, push the bearing seat back, and tighten the belt until the belt is properly tightened
To tighten the fastening screws on the bearing pedestal, cover the machine cover and screw in the fastening screws
The transmission belt and the transmission chain should be adjusted together
If the transmission belt is adjusted, the tightness of the transmission chain will change
Therefore, the transmission belt and the transmission chain should be adjusted together
Please continue to share more about vacuum dough mixing machine http://www
zczkhmj
com