What problems will occur inside the dolomite impact crushe

  When processing dolomite, the counterattack crusher mainly realizes its fine crushing function
In the process of development, the machine has made many structural improvements for the problems in production, but it has not reached a perfect level
When working, there will still be some defects, resulting in the occurrence of problems in production
Here is to introduce the problems that will occur inside the machine, And how to solve these problems
Problem 1
The sudden increase in vibration
In the production of dolomite, the sudden increase in vibration of the counterattack crusher (www
shibangchina
com) will cause the unstable operation of the equipment in production, resulting in great changes in production efficiency
Therefore, it needs to be solved in time
The main reason for this problem is that the rotor is not well balanced when replacing or assembling the plate hammer
The solution is to reinstall the plate hammer; Problem 2
There is a knocking sound inside the equipment in dolomite production
This phenomenon is mainly caused by the looseness of the lining plate fasteners of the impact crusher
If it cannot be treated in time, it will cause the aggravation of the wear of parts in production
The solution is to stop the machine in time, then clean the crushing chamber, and check the fastening of the lining plate and the gap between the hammer and the lining plate, The broken parts need to be replaced in time; Problem 3
The bearing temperature is too high in production
This phenomenon is mainly caused by excessive or insufficient grease, dirty grease and bearing damage
The solution to this problem is to check whether the grease is appropriate
Then for the phenomenon of dirty grease, it is necessary to clean the bearing and replace the grease
If the bearing of the impact crusher is damaged in production, Then it can only be replaced, otherwise it is difficult to ensure the smooth progress of production; Problem 4
The phenomenon of large particles of dolomite finished products in production
The solution to this phenomenon is to adjust the gap between the front and rear impact frames, replace the lining plate and plate hammer, and adjust the position of the impact frame;