What are the requirements for the construction of elevator door pocket line

  The products of elevator door pocket line manufacturers generally do not contain formaldehyde, are non-toxic, non permeable and non radioactive, and have sufficient strength, stiffness, hardness, especially impact resistance
During construction, the elevator door pocket line should be made into a frame with the selected shape and color stone plastic lines, and then the assembled elevator door pocket should be installed on the wall according to the bayonet
The gap between the elevator door pocket and the wall is filled with sealant to prevent the curling of decorative lines
At the same time, it beautifies the joint between the wall and the elevator door pocket
The lower opening of the elevator door pocket should be made of artificial marble to avoid blackening and deformation due to moisture
During installation, it must be ensured that the color and texture of the same elevator door pocket are the same, and the sectional modeling lines and joint sections are the same

When installing the threshold stone of the elevator entrance, it is required that the elevator frame edge and the floor tile should have a 3mm slope, and the outer opening of the top stone should have a 2mm slope with the door frame edge http://www
stmuzj
com/QiYeZiXun/1425
html Elevator door pocket line manufacturer