Waterborne orange grain paint, hammer grain paint additive B660

  This product is a real water-based additive
It does not contain any solvent and will not burn
The emission of VOCs is 0
It is the only orange grain additive soluble in water in the market

Appearance: light yellow liquid , Viscosity (CS, 25 ℃) , 30s
 
Functional features: functional additives, produce orange lines and hammer lines, uniform lines and strong three-dimensional sense
 
Scope of application: for waterborne resin paint Two stage dispersion (emulsion)
 
Production process of orange grain paint and hammer grain paint:
1
When designing the formula, pay attention to increasing the solid content as much as possible to achieve the effect of fullness and three-dimensional feeling

2
For the production of orange pattern paint, the color is now matched, and then 0
8% of additives are added, which can be added gradually according to the effect
Agent until satisfied
The recommended amount is 1%-2%
The amount of orange grain additive varies according to the amount of filler
3
For the production of hammer paint, dilute the aqueous silver powder (slurry) with water 1:1, add the aqueous resin, and then add the color
After the completion of color mixing, add water-based additives and gradually add them until they are satisfactory
The recommended amount is 0
5% - 1
5%

The addition amount of hammering additive varies according to the amount of filler
During production, avoid high-speed dispersion and control it at 800 rpm
/Within minutes

4
Additives can be added after diluted with water 1:1
5
Adjust the proportion of pigments and fillers according to the proportion of curing agent

6
The curing agent Wanhua 161 is diluted with PMA
7
When spraying, spray a thin layer first and then a thick layer after 15 minutes
The diameter of the spray gun is 1
5 ~ 2
0
 
Reference formula:
Waterborne orange paint (gray) , Waterborne hammer paint
Raw materials , Quantity% , Raw materials , Quantity%
2033 (Wanhua) , 55  2033 (Wanhua) , fifty-five
Cosolvent BCS , 5   Waterborne aluminum powder (slurry) , four
Titanium dioxide , 14   Pigment , fifteen
Carbon black , one
Barium sulfate , 17   Barium sulfate , seventeen
DMEA  0
1   DMEA  zero point one
Defoamer 2100 , 0
3   Defoamer , zero point three
Thickener , 0
2   Thickener , zero point two
Dispersant 1930h , 1   Dispersant , one
Wetting agent 6002 , 1  Wetting agent , one
Water (deionized) , 5   Water , five
Orange grain additive , 1～2   Hammer grain additive
 
Note: the above information is provided by the company free of charge and is only for construction reference
It does not constitute the guarantee and complaint of the company's legal liability
A series of products should be used together
When using this product, because the use methods and environmental conditions of the product are diverse and not controlled by us, we can formulate the most appropriate formula and operation methods to ensure the quality of the product
In case of any ambiguity, please contact the Consulting Service Department of the company

  If you want more information, please add wechat or telephone (the same) contact number: 15112374343 manager Zhang