The manufacturer supplies marine antirust oil

Introduction: 8011 has strong anti rust ability and salt spray resistant sealing agent
It can form a dense protective film on the metal surface
The film has strong adhesion, which greatly increases the salt spray test time and effectively isolates the protected metal from external substances
It is not easy to scratch and does not affect the conductive welding
After the surface (such as copper, iron, stainless steel and other metals), it is electroplated with nickel, chemical nickel, white zinc, black zinc, blue zinc, color zinc, chromium, blackening and Qiang black (black nickel), The salt spray resistance of tin and other plating types) workpiece can be greatly improved after adding it
The neutral salt spray test can reach more than 72-120 hours without rust
(the salt spray resistance will be different due to different plating thickness, plating process and plating types)
If nickel is plated in general, it will rust in less than 4 hours, and the surface gloss is good after treatment
The workpiece and workpiece will not be pasted together
It has strong anti fingerprint, anti discoloration, waterproof and anti-oxidation ability
It is operated with stock solution at room temperature
The required equipment is simple (one centrifuge, one rubber box and one rubber bucket, and one screen)
It is easy to use
The electroplating sealing agent is an ideal anti rust and salt spray resistant sealing material

 
Applicable workpieces: all kinds of hardware standard parts, stamping parts, screws, nuts, mesons, corns, springs, rivets, electronic accessories, etc
 
usage method:
1： Small workpieces: first put the electroplated workpieces (passivation and drying water) into a one square meter screen, then immerse them in the rubber bucket containing 8011 sealing agent, and slightly turn the workpieces to make the surface of the workpieces fully contact with 8011 sealing agent (be sure to apply a layer of 8011 sealing agent on the surface of the workpieces, otherwise the ideal antirust effect will not be achieved)
Pull up the workpieces and put them into a centrifuge for drying (about 30 seconds), The 8011 sealing agent thrown out can be recycled and reused
When not in use, please cover the 8011 working fluid with the barrel cover

2： Large workpieces: large workpieces and workpieces with strong surface gloss are recommended to be sprayed and brushed
After treatment, if the surface of the workpiece is oily, it can be dried by fan or placed in the atmosphere for natural drying, which can be dried in about half an hour

 
Operation process: electroplating workpiece → Water washing → Passivation drying → 8011 closed → Centrifuge drying → packing
 
matters needing attention:
1
This product cannot be heated, otherwise it may catch fire and cause fire

2
Do not mix with other raw materials

3
This product cannot be eaten into the human body
Wash your hands with detergent after operation,
4
For the working fluid that has been used for a long time, the scrap iron and other garbage left at the bottom of the barrel shall be cleaned to avoid affecting the surface gloss of the workpiece

5
If there is too much oil feeling on the workpiece after treatment, you can call
Our company has a specially assigned person to solve it for you