Td50-24 / 2 Hangzhou Nanfang water pump

  Nanjing Sri Lai 13584027121 Miss Ma qq146245497 South water pump , TD pipeline circulating pump TD series Southern brand td100-32 / 2 vertical pipeline circulating pump Hangzhou south water pump TD pipeline circulating centrifugal pump TD single-stage pipeline centrifugal pump is equipped with standard motor and mechanical seal
Compared with similar products, the structure of this kind of products is less vulnerable to the influence of impurities in the pumped liquid

The product is designed in the form of disassembly and assembly that can be pulled out from the top, which can repair the pump without affecting the pipeline system

Td125 and td150 products are provided with extended shaft structure and detachable structure at the same time
All products above TD200 adopt detachable structure
There is no need to disassemble the motor to replace the mechanical seal

application
The product is suitable for use in clean, thin, non corrosive, non flammable and explosive liquids that do not contain any solid particles and fibers that may cause mechanical or chemical damage to the pump
When the liquid is viscous or dense, it will reduce the pump characteristic curve and increase the energy consumption

Liquid temperature: - 15 ℃ to ~ 110 ℃

Maximum working pressure: pn12 bar for conventional type; The special type is PN16 bar

Use location
When TD products are used to transport water, they can be used for domestic water, industrial water, cooling system water and cold and hot water of district heating system
TD products can be used in the following locations:
1
  Main circulating pump
2
  Pump in mixing loop
3
  Boiler mixed flow pump
4
  Gas refrigerator pump
5
  Partial flow filter pump
6
  Pump for constant pressure system
7
  Domestic hot water circulation
TD is used in industry
Such as in chemical, pharmaceutical, food processing and other industries
Can be used to:
1）  Transportation of raw materials
2）  System pressurization
3）  Mixed loop circulating pump
 
product mix
The product adopts the structure that the motor and pump can be separated, and the pump part is designed to be pulled out
All these products are equipped with standard motors and mechanical seals
The motor is fully enclosed and air-cooled standard motor
Its main dimensions comply with JB / t8680 standard

The product pump body is equivalent to a section of pipeline
During the maintenance of the pump, the pump body can be blocked with a blind flange, so as not to affect the normal operation of the system

The size of the connecting flange of the product shall comply with the relevant provisions of PN16 in GB / t17241
6 or iso7005-2 / din2501 standard

The inlet and outlet diameter of the product shall comply with relevant standard dimensions

The pump head of the product is a device connecting the motor and the pump
The seal between it and the pump body adopts & ldquo; O” O-ring

 
Flow: 0-780m3 / H ,
Lift: 0-55m , Power: 1
1-110kw ,
Models: td32-38 / 2, td40-48 / 2, td50-24 / 2, td80-22 / 2, etc
 
Nanjing sirilai Electromechanical Equipment Co
, Ltd
Ma Lijuan