Supply water-based sealer transparent antirust seale

  Introduction: 75533 water-based sealer is a transparent water-based antirust product
It has good adhesion, anti-oxidation and anti Fushi ability to most metals and coatings
Curing makes the coating surface transparent, bright, wear-resistant and tough, insoluble in water, acid and alkali resistant, and has the properties of anti fingerprint, temperature, moisture, acid and alkali
And can withstand high temperature
It is the recommended choice for coating surface anti Fushi and anti discoloration
Easy to operate, dip coating and spraying
This product has high viscosity
It can be used with stock solution or mixed with water 1:2-3 according to different requirements
Neutral salt spray test can increase 12-300 hours without rust
After preparing the working solution, fully stir the working solution and stand still for about 10 minutes before use

characteristic:
1
This product is a water-soluble substance, which can be diluted in an appropriate proportion as needed
Non flammable, easy to use

The protective film formed after treatment is insoluble in water and has good oxidation resistance, vulcanization resistance and moisture resistance
The film has good toughness and can be bent and deformed

3
The protective film is hard plated, with good wear resistance and scratch resistance
The Mo layer has high gloss and good decorative effect

 
Scope of application:
It is suitable for anti rust and anti change treatment on the surface of metal after electroplating, such as stainless steel, steel, blackened workpiece, aluminum alloy, various electroplated workpiece, copper and copper alloy coating, anti gold coating, nickel chromium, silver coating, blue, white, zinc and other plating species, which has a good protective effect
At the same time, it is also widely used in hardware, communication equipment, instruments, household appliances Decorative plating and anti Fushi plating of lamps and other products

 
usage method:
This product is applicable to all metal or electroplated parts on the market
It is used at room temperature
It is soaked in the solution for about 1-2 minutes
All parts of the workpiece should be completely covered during soaking
Shake the workpiece from time to time during soaking, and then put it directly into the centrifuge for drying
After being dried by the centrifuge, it is put forward to dry at room temperature for 5-10 minutes, Put it into the dryer for drying (20-30 minutes at 130 ℃ and 15-20 minutes at 160 ℃)
Or spray or brush evenly and dry for 5-10 minutes before baking (any test can be done after 24 hours)
 
matters needing attention:
1
It is forbidden to use containers filled with acid and alkali to load this product
So as not to affect the quality,
2 correctly master and judge the concentration of the soaking solution
If a rainbow appears on the low surface of the product after soaking, it indicates that the concentration of the solution is too high, and pure water should be added for dilution
If local color spots appear after soaking, it indicates that the concentration of the solution is too low, and the product should be added appropriately and soaked again

3
The drying temperature is 130 ℃ for 20-30 minutes, and 160 ℃ for 15-20 minutes
If the operation result is not satisfactory, please re adjust the drying temperature and time according to the actual situation

4 if the product is found to have brittle lines, it indicates that the drying temperature is too high or the drying time is too long

5 this product should be sealed and stored if it is not used for a long time

6
In case of any ambiguity, please contact us by telephone

 
Operating process : Degreasing and derusting or electroplating - washing - drying - 75533 sealing - centrifuge drying - place at room temperature for 5-10 minutes before drying
The drying temperature of 130-160 ° C is preferred - cooling packaging

 
Packing: 200ml sample, and other large packages, 1kg 5kg   25 kg / barrel
Storage: please put it in a cool and ventilated place away from fire source
The validity period is 6 months from the date of receipt
 
Statement: the contents and suggestions of this manual are based on the experimental data of the company; Due to the differences in operation and equipment among users, the company does not make any warranty for the results of the use of relevant products of the company, nor is it responsible for the damage caused by adverse results
All materials in this manual shall not be used as a basis for copyright infringement