Supply Tianyu ty605 hot press, SPE hot press

Product purpose:	1
type:	constant temperature hot press
power supply voltage:	AC380, AC220
brand:	Tianyu
model:	ty605

Ty605 four column hot press | hydraulic hot press | hot press forming machine series:
Scope of application: this series of hydraulic press is widely used in various PV, PE, PC, EVA and other plastic sheets, as well as some products that need to be heated and formed
It is a common equipment in the electronic and plastic industries
Features of hot press products:
1
This series of hydraulic machine tools takes the liquid pressure of 1-14mpa as the power source and is externally connected with three-phase AC380V 50Hz or three-phase AC220 60Hz AC power supply
The maximum total power consumption is no more than 8
5kw
2
This series of equipment uses liquid as medium to transfer energy, with high efficiency, and the pressure holding time can be freely adjusted within 0-24 hours
3
The noise of the equipment during standby is much lower than that of similar products
4
The upper and lower working faces are equipped with heating plates after heat treatment, a general T-groove fixed mold is opened, and the intelligent temperature controller PID control is adopted
It has high precision and temperature error ± Within 1 ℃
5
The hydraulic hot press adopts a four column and three plate structure
The vertical accuracy of the movable plate is controlled by four precision guide sleeves
The parallel accuracy of any point between the lower working face and the upper working face is less than 0
08mm
6
Adjustable positioning oil cylinder is adopted, with high positioning accuracy of bottom dead center, and the repetition accuracy is less than 0
01mm
100% to ensure the stamping depth
7
It has automatic counting function and two control modes: automatic and semi-automatic
The press mounting die can be stopped within any travel range manually
It is equipped with emergency pick-up button and infrared hand protection device
8
The lowering speed of the spindle is 88mm / s,
9
The pressure, pressing stroke, pressure holding time and closing height can be adjusted by customers to facilitate operation;
10
The hydraulic system is built into the bottom of the oil tank, with a clean and stable appearance
Casters and foot cups are installed under the workbench, which can be moved easily
The weight of the largest model of this series is no more than 450kg
11
The output range of this series of hydraulic machinery is 3-50tf
It is optional
(1tF = 1000kgf = 9
8kn), or it can be customized according to customer requirements