Stauff hydraulic filter element rp050e03

Xiamen Shengqi Electromechanical Equipment Co
, Ltd
Huang Gong: 18106908806 (wechat)
Fixed line: 0592-6081295
QQ:2761306899
Thank you for visiting Xiamen Shengqi website! Inquiry purchase Xiaohuang second reply
Smk20g1 / 4-pc type straight through ferrule connector
Selection standard of ferrule iso8434-1 / DIN 2353
Metal parts
Steel, zinc nickel coating without hexavalent chromium = c6f
If you need to order stainless steel V2a (1
4305), please put the
Replace c6f with V2a
If you need to order stainless steel V4A (1
4571), please put the
Replace c6f with V4A
seal up
If you need to order FPM sealing products, please replace P in the order code
Is v
If you need to order EPDM sealing products, please replace P in the order code
Replace with E
Fluororubber seal model is FPM in North America
Protective cap
Standard material: Steel
If you need to order steel hexagonal protective cap, please add - SK in the order code
(e
g
smk20-08l-pg-sk-c6f)
If you need to order plastic protective caps, please add - KK (if any) to the order code
SMK20-08L-PG-KK-C6F）
For more information on materials, seals and protective caps,
If you need other connection ports or sealing forms, please contact our company
Test 20 SMK adapter thread m16x2 overall dimension / order code
Ordering code for overall dimension of series pressure bearing pipe diameter
(mm / in) NBR seal (FPM * seal)
SMK20-06L-PG-C6F
SMK20-06L-VG-C6F
SMK20-08L-PG-C6F
SMK20-08L-VG-C6F
SMK20-10L-PG-C6F
SMK20-10L-VG-C6F
SMK20-12L-PG-C6F
SMK20-12L-VG-C6F
SMK20-15L-PG-C6F
SMK20-15L-VG-C6F
SMK20-18L-PG-C6F
SMK20-18L-VG-C6F
SMK20-22L-PG-C6F
SMK20-22L-VG-C6F
SMK20-28L-PG-C6F
SMK20-28L-VG-C6F
SMK20-35L-PG-C6F
SMK20-35L-VG-C6F
SMK20-42L-PG-C6F
SMK20-42L-VG-C6F
SMK20-06S-PG-C6F
SMK20-06S-VG-C6F
SMK20-08S-PG-C6F
SMK20-08S-VG-C6F
SMK20-10S-PG-C6F
SMK20-10S-VG-C6F
SMK20-12S-PG-C6F
SMK20-12S-VG-C6F
SMK20-14S-PG-C6F
SMK20-14S-VG-C6F
SMK20-16S-PG-C6F
SMK20-16S-VG-C6F
SMK20-20S-PG-C6F
SMK20-20S-VG-C6F
SMK20-25S-PG-C6F
SMK20-25S-VG-C6F
SMK20-30S-PG-C6F
SMK20-30S-VG-C6F
SMK20-38S-PG-C6F
SMK20-38S-VG-C6F
1、 Installation process of ferrule pipe joint
1
Saw off the vertical axis of the pipe, and the allowable angle deviation between the pipe end face and the axis is 1 / 2 degree (with a square ruler)
Slightly deburr the inner and outer surfaces of the pipe end and clean it
2
Apply a little oil on the threaded part of the joint body, and apply a little oil on the contact surface between the ferrule and the 24 degree cone and the contact surface between the ferrule and the compression nut (especially the size)
Above 20s)
3
Push the compression nut and ferrule onto the pipe, and press the pipe into the preassembled joint until the positioning edge
Tighten the nut until the ferrule catches the pipe and feels it
The nut has been preliminarily tightened

4
On this basis, use a wrench to tighten 1
25 turns to complete the pre installation

5
Check whether the ferrule cuts into the steel pipe
It can be seen that the sealing line is obviously raised, and the ferrule can be rotated at a certain angle, but it cannot be displaced axially

6
After final installation, screw another 0
5 turn to complete the installation

2、 Possible problems on the customer site
1
Why does the pipe joint leak
Answer: causes of leakage: 1
The steel pipe is not pushed onto the positioning edge of the joint body, resulting in insufficient cutting of the ferrule into the steel pipe and no sealing line; 2
The worker did not press the
Specified installation: if the end face of the steel pipe is not vertical and there are burrs on the steel pipe surface, it is not screwed to the specified number of turns, and it is screwed more than the specified number of turns; 3
During installation, the steel pipe is crooked
Skew leads to uneven cutting of ferrule, resulting in insufficient sealing line in some parts; 4
The size of steel pipe is small and the quality of steel pipe is not high

2
Why is the installation of large-size pipe joints particularly laborious? How to install labor-saving
Answer: 1
During installation, the skew of steel pipe leads to uneven cutting of ferrule, resulting in increased tangential friction; 2
Failing to apply oil at the specified place; Labor saving method
Apply a little oil on the threaded part of the joint body, and apply a little oil on the contact surface between the ferrule and the 24 degree cone and the contact surface between the ferrule and the compression nut