Sichuan Chengdu grass planting grid factory

  1、 Foundation layer 1
Preset drainage channel or drainage slope; 2
Lay a 15-30cm thick gravel layer (depending on the actual situation), tamp and level it with a 10t vibratory roller, and consider the maximum bearing capacity; 3
Mix 60% gravel and 40% sand evenly, lay it on the surface of the gravel layer with a thickness of about 5cm, and compact it with a small roller
If the roller cannot be used, tamp it several times with a rammer or flat vibrator until the subgrade is compacted, and then level the surface of the subgrade with a horizontal steel ruler
2、 Laying grass planting lattice 1
When laying grass planting lattice, it is recommended to use 1-2cm sand soil under the grass planting lattice as the leveling layer
2
The grass planting lattice shall be paved according to the mutual connection of buckle and clamping groove
After the laying is completed, the planting soil can be filled in the grass planting lattice frame, and the height of soil layer shall be subject to the plane of grass planting lattice
3
Sow grass seeds or lay turf
4
If grass seeds are sown, they will be watered for maintenance
After half a month, the grass seeds will grow, and the soil layer will naturally sink about half a centimeter, so they can be parked for use
5
If the turf is paved, water thoroughly after paving the turf to make the turf soft, and then press the grass root into the grass planting grid with a small roller or flat vibrator
The grass root will fully combine with the nutrient soil and grow
It is recommended to maintain it for 2-4 weeks after paving