Power monitoring ftva-y and rxpmv of fire fighting equipment supplied by Yueqing Beiping manufacture

  Series fire equipment power supply monitoring system can monitor the power supply of fire equipment in real time
By detecting the voltage, current, switching state and other relevant equipment power supply information of fire equipment power supply, it can judge whether there is fault information such as open circuit, short circuit, overvoltage, undervoltage, phase loss, phase staggering and overcurrent (overload) of fire equipment power supply, and alarm and record it
The system has the characteristics of reliability, real-time, digitization, intelligence, networking, automation and continuous monitoring
Reflect the power supply status of the monitored equipment in real time and display it centrally, so as to effectively avoid the critical situation that the fire-fighting equipment cannot work normally due to power failure in case of fire, and ensure the reliability of the fire linkage system to a certain extent
It is applicable to intelligent buildings, high-rise apartments, hotels, restaurants, commercial buildings, industrial and mining enterprises, national key fire fighting units, petrochemical, culture, education and health, finance, telecommunications and other fields, in line with 2011 Fire fighting equipment power supply monitoring system and 2010 Standard of general technical requirements for fire control room

2　  Applicable environment
● working temperature: - 10 ℃ ~ + 55 ℃
● storage temperature: - 20 ℃ ~ + 70 ℃
● relative humidity: ≤ 95% non condensing
● altitude: ≤ 2500m
● pollution level: Level III, installation category: Level III
3 system functions
3
1  Monitoring alarm
● power circuit switch status of monitored equipment
● working status of power supply of monitored equipment (voltage, current and alarm status information)
● alarm response time: ≤ 30s
● alarm sound signal: it can be eliminated manually
When there is another alarm signal input, it can be started again
● alarm light signal: the red LED indicator is always on
3
2  Fault alarm
● the connecting line between the monitor and the module (voltage / current signal sensor) is open or short circuited
● monitor main power supply undervoltage (& le; 80% main power supply voltage) or overvoltage (& Ge; 110% main power supply voltage)
● the connecting line between the monitor and its split power supply is open circuit and short circuit
● when the monitor has the above faults, it can send out the audible and visual fault alarm signal which is obviously different from the monitoring alarm signal
● fault alarm response time: ≤ 100s
● fault alarm sound signal: it can be eliminated manually
When there is another alarm signal input, it can be started again
● fault alarm light signal: yellow LED indicator is always on
● during fault, the normal operation of non fault circuit will not be affected
3
3  Control output
● remotely operate the alarm relays of individual or all monitored equipment
● monitor alarm control output: normally open passive contact, capacity: AC250V 3A or dc30v 3A
● monitor control output: normally open passive contact, capacity: AC250V 3A or dc30v 3A
3
4  Self inspection
● connection inspection: open circuit and short circuit of communication line and split power line
● equipment self inspection: manual inspection or system self inspection
● self inspection time: ≤ 60s
3
5  Alarm record
● record 1000 pieces of relevant fault alarm information
● alarm type: fault type, occurrence time and fault description
● alarm event query
● alarm record printing
3
6  Operation classification
● daily shift: you can enter the software interface to view the real-time monitoring, eliminate the alarm sound and query the alarm records
● monitoring operation level: it can operate other operations besides information maintenance for the system itself
● system management level: it can operate any functional module of the system
4
Technical indexes of afpm100 monitoring detector
4
1  Working power supply
● main power supply: AC220V 50Hz (variation within 85% ~ 110% is allowed)
● standby power supply: in case of low voltage of main power supply or power failure, maintain the working time of monitoring equipment ≥ 8h
● the monitor provides DC24V power supply for the connected module (voltage / current signal sensor)
4
2  Working system and transmission mode
24-hour working system, Modbus RTU communication protocol, RS485 half duplex bus mode, transmission distance 1km (communication transmission distance can be extended through repeater)

4
3  Main parameters and components
Afpm100 fire fighting equipment power status monitor is wall mounted, and its main functions and components are as follows:
● monitoring capacity: ≤ 128 points
● display mode: dot matrix LCD
● I / O module: built in remote intelligent I / O module
● audible and visual alarm module: built in horn, buzzer and LED indicator
● standby power supply: DC24V, 24Ah
 
 
● contact information: 400-678-7277