Portable mobile air conditioner winter and summer mobile air conditioner post local cooling air conditioner sac-25d

  Portable mobile air conditioner local cooling air conditioner sac-25d for mobile air conditioner post in winter and summer is a simple portable air conditioner
Its essence is to integrate the internal and external units of ordinary air conditioners
There is no outdoor unit and professional installation is not required
Through the refrigeration of the compressor, the exhaust pipe is used to exhaust the hot air, so as to achieve the effect of local area cooling
Mobile air conditioners provide irreplaceable convenience for places where outdoor units cannot be installed
From a technical point of view, the use power and cooling capacity of mobile air conditioners and ordinary air conditioners are basically the same
The difference is the air duct circulation design
The air volume circulation of ordinary air conditioners is aimed at the indoor air circulation, while the mobile air conditioners are designed to reduce the indoor air temperature and absorb the outdoor fresh air to ensure the exchange with the indoor air
There will never be “ Air conditioning disease ” Occurrence of
This kind of air duct design for fresh air causes that the indoor temperature will not drop very low
Generally, when the outside temperature is 36 ℃, the indoor temperature is about 28 ℃, and the local temperature can reach about 25 ℃
Consumers should be aware that the biggest feature of mobile air conditioners is that they can cool down in local areas! As the mobile air conditioner is an integrated air conditioner, the noise is higher than that of the ordinary air conditioner
With advanced noise reduction technology in winter and summer, the minimum noise of the machine operation is reduced to about 48 dB, which is equivalent to the sound of 2p cabinet machine

Function introduction of industrial air conditioner in winter and summer:
1
large brand Panasonic rotary closed compressor is adopted, with stable performance and low failure rate
2
hydrophilic membrane internal thread, high efficiency evaporative condenser
3
high quality aluminum centrifugal blades are used, with strong wind, uniform air flow and low noise
4
easy to carry, small and flexible, easy to use and move at will
5
energy saving, no installation, plug and play
6
the centralized heat discharge of flexible hose has less impact on the surrounding environment
7
the fuselage is of integrated design and scientific layout, which can store water in the water tank It can also be connected to water pipe for drainage, with dehumidification effect
Applicable places of industrial air conditioners in winter and summer:
1
cool down the workers in the high-temperature operation environment

2
cool the injection molding machine, communication equipment, machine tool distribution box and other mechanical equipment to improve the working efficiency and prolong the service life of the equipment
3
workplaces that need ventilation and cannot be closed, so as to relieve the heat and provide cool and comfortable working environment for the staff
4
cooling the product in the convection water line to improve the product quality
Precautions for use of industrial air conditioners in winter and summer:
1
when there is adhesion or dust on the surface of the machine body, it can be cleaned with soapy water to avoid gasoline, solvent, etc
and to avoid paint falling or discoloration

2
the filter screen shall be cleaned regularly (about once every 2 weeks) to maintain the dehumidification, dust removal efficiency and service life of the machine, and to avoid the breeding of bacteria

3
if there is a lot of dust and grease in the operating environment, the heat exchanger shall be cleaned regularly (once every 1-2 weeks)
When cleaning, remove the air inlet panel of the machine, dip a toothbrush in soapy water and move the aluminum sheet of the heat exchanger up and down
Remember to prevent the heat exchanger from falling down during cleaning

4
when the machine is not used for a long time, please unplug the power cord, clean the machine according to steps 1, 2 and 3, wrap the machine in a packing box and store it in a cool and dry place

Packaging of industrial air conditioners in winter and summer:
Industrial air conditioners in winter and summer are packed in cartons
After sales of industrial air conditioners in winter and summer:
Winter and summer industrial air conditioners are guaranteed for 1 year
In case of any non-human quality problem during the warranty period, our company can repair it free of charge