Optical fiber overhead cable puller electric cable puller full automatic cable pulle

  1： Working principle and application of optical cable tractor: 1: optical cable tractor is mainly composed of engine, gearbox and conveyor
The jaws of the conveyor are opened and closed up and down to make way for the effective retraction and release of the cable
The tractor uses the gasoline engine as the power source, drives the main shaft gear chain through the gearbox, and the chain engages the transmission device to drive the transmission belt to realize linear movement
The machine is also equipped with a support rod to support the reaction force of the cable during the operation of the machine, so as to keep the machine stationary when transmitting the cable

2: The operation of the optical cable tractor is simple
After manually starting the machine, there are four operation gears (push, fast pull, neutral and slow pull) to select the required gear
Before shifting, the throttle must be adjusted to idle speed
After shifting, the throttle on the control handle can operate
Turn off the flameout switch after use

2： Technical parameters of optical cable tractor:
Traction force: ＞ 200 kg
Traction speed: 50-60m / min
Large opening size of conveying port: 5mm-45mm
Applicable cable: 288 core / 7 * 2
6 / 4 * 35m2 or less (optical cable / steel stranded wire / cable)
Belt size: perimeter 1000m * width 60mm
Engine petrol tank: 4 litres (90 / 92# petrol)
Total power of equipment: 3
7 kw
Machine size: 80 * 60 * 80cm / L * w * h
Size of wire bracket: outer diameter 110cm * inner diameter 85CM (removable)
Machine weight: 60kg
2、 Optical cable tractor can save 2 people
The pulling force is equivalent to the * pulling force of 4-5 people
It can push the threading device, pull the optical cable, overhead and buried construction operation without damaging the cable and resting
Reduce construction cost and improve construction efficiency
1
The optical cable tractor is suitable for threading and take-up of various specifications of pipe threading devices, with a large distance of about 300-500m
2
The optical cable tractor is suitable for all kinds of overhead and underground optical cables
It can work with 12-288 cores, of which the length below 144 cores can reach about 1000m
3
The optical cable tractor is suitable for the laying construction of street lamp poles, and the laying of cables with a diameter of less than 20mm
4
The large pulling force of the optical cable tractor can be equal to 4-5 people
5
When the machine of optical cable tractor exceeds the large follow-up tension, it will automatically stop working to protect the optical cable from damage
Department: Wang Dan
Sales mobile phone: 13220800601 wechat same number
Sales Q: one billion ninety million four hundred and sixty-four thousand three hundred and twenty-seven
E-mail: 1090464327@qq
com
, Address: Jinyu Road, Jining City, Shandong Province
Taobao store link:
https://shop390862165
taobao
com/shop/view_shop
htm?spm=a2oq0
12575281
category
d707
4ace1deboBB1iR& ; user_ number_ id=3332252568