Operation process of feeding, threading and connecting film of pearl cotton horizontal and vertical slitting machine

  Operation process of feeding, threading and connecting film of pearl cotton horizontal and vertical slitting machine pearl cotton horizontal and vertical slitting machine is mainly suitable for slitting and cutting of pearl cotton, EVA, PVC, sponge, foam and other materials
The operation flow of feeding, film threading and film connecting of pearl cotton slitter is as follows;
1
Feeding: according to the requirements of the original slitting plan, according to the operation process of the line, and according to the actual situation, lift its corresponding parent coil on the aging frame, and then place it on the unwinding frame of the pearl cotton Slitter according to the selected direction inside and outside the corona surface, clamp the steel core with the control button, and leave the steel core support arm and crane

2
Film threading: when there is no film on the pearl cotton horizontal and vertical slitting machine, the film shall be penetrated first
Using its film threading device and function key, tie one end of the original film to the ring eye of the film threading chain, and then start the film threading button to make the film level and distributed on each roll along the cutting process

3
Film receiving: when there is a film on the paper cutter and the joint is changed, use the vacuum film receiving table to start the film receiving table to the working position, manually flatten the film on the first traction roller of the pearl cotton Slitter, and start the upper vacuum pump to absorb the film, so that the film can be adsorbed on the film receiving table smoothly, then paste the double-sided tape and cut off the excess film under the tape, Flatten the film on the unwinding rack and start the vacuum pump at the lower part to make the film absorb smoothly
Then take off the upper paper layer of the tape and bond the film smoothly
The joint must be neat and wrinkle free
Then turn off the upper and lower vacuum pumps and open the film receiving table to the non working position