Online quotation of corrosion resistant magnesium alloy sacrificial anode

 
Online quotation of corrosion resistant magnesium alloy sacrificial anode
Characteristics and advantages of thermit welding the current cut-off flow of welding point is equal to that of conductor; The welding point is permanent and will not cause high resistance due to loosening or corrosion; The welding point is like copper, which is stronger than copper itself and is not affected by corrosive products; The welding point can withstand repeated large surge (fault) current without degradation; The welding operation method is simple and easy to use; Portable and portable equipment; No external power or heat source is required during welding; The welding quality can be checked from the appearance; It can be used for welding copper, copper alloy, copper plated steel, various alloy steels, including stainless steel and high resistance heating source materials

  Corrosion resistant magnesium alloy sacrificial anode Online quotation
  Key points of thermit welding process 1 factors affecting the welding effect a good welding spot has a full and bright surface without pores and slag inclusion
After cutting, its section is as a whole without pores and defects
The main reason affecting the welding effect is moisture or moisture
Since moisture may be absorbed in the mold, welding powder and welded object, how to prevent or remove moisture is the most important step that must be taken during welding
Another factor affecting the welding effect is the cleanliness of the mold and the welded object
For example, the dust, grease, oxide or other attachments on the surface of the welded object must be removed to make it clean and bright before welding, otherwise the conductivity and mechanical properties of the welded joint will be affected

  Corrosion resistant magnesium alloy sacrificial anode Online quotation
If the residue left in the mold is not completely removed, the surface of the solder joint will not be smooth and bright
To sum up, key points for attention: 1
Expel water vapor (can be baked with blowtorch), 2
Clean the welded object, 3
Clean the mold, 2
Precautions during the application of welding powder (1)
Each package of welding powder corresponds to a welding spot, and the brand of welding powder should correspond to the mold, which should be carefully compared and confirmed before use
Libo is a personalized company
We will participate in every customer and batch of products
We will consider every detail for customers and solve problems for customers
We work hard every day and night for customers' affirmation
I believe that as long as we cooperate with us once, we will become a family
yjx745835
Consultation telephone , thirteen billion nine hundred and thirty-nine million one hundred and fifty-seven thousand nine hundred and sixteen