O-type cable clamp ljo125 * 180 * 150 cable clamp is easy to use

  O-type cable clamp ljo125 * 180 * 150 cable clamp is easy to use
Ljo125 * 180 * 150 cable clamp, O-type cable clamp, O-type cable clamp, easy to use, ljo type cable clamp, mining cable clamp
The full sealing performance design of O-type cable splint improves its wear resistance and impact resistance by more than 50% on the previous basis, and more effectively ensures the safety and applicability of the shearer in the working process
Ljo125 * 180 * 150 cable clamp board

1、 Introduction to ljo125 * 180 * 150 cable clamp:
Ljo125 * 180 * 150 cable clamp plate is made of nylon 66 with flame retardant and antistatic agent (nylon 66 + flame retardant + antistatic agent) and steel framework by injection molding
According to the needs of shearer working face, it is connected into a protective channel for protecting cables or water pipes through pins or bolts

2、 Installation and use of ljo125 * 180 * 150 cable clamp:
1
Firstly, insert the T-plug of the horizontal connecting plate into the T-groove of the left and right clamping plates respectively, make the semicircular positioning hole of the T-plug concentric with the positioning pin hole of the clamping plate, and the positioning pin is inserted into the positioning pin hole to form a cable clamping groove
2
After aligning the Shou tail holes of the multi section cable clamp slot, use the connecting pin shaft to penetrate into the hole from inside to outside, install the cotter pin, and connect it into a section of cable clamp slot
(* the final length can be determined according to the needs of the coal mining face)

3
Put the cable into the clamping groove, and connect the clamping groove into a closed cable clamp with a transverse connecting plate as shown in the figure, so as to form a complete cable clamp to meet the use requirements of the shearer

3、 Ljo125 * 180 * 150 cable clamp features:
Ljo125 * 180 * 150 cable clamp has the advantages of light weight, small volume, compact structure, convenient and fast installation, simple maintenance, long service life, high tensile strength and impact resistance
The utility model has the advantages that the steel skeleton is lined to bear the drag force and protect the cable or water pipe from external forces
Nylon 66 is added with flame retardant, antistatic and other additives, which has flame retardant and antistatic effects
The adjacent cable clamps are easy to connect, and can be extended arbitrarily according to the needs of the shearer working face
During the dragging process, the cable or water pipe can be protected from being broken or damaged, so as to improve the production efficiency and reduce the maintenance cost

Unocal cable splint is mainly used for thin coal seam shearer, double drum shearer, * shearer, etc
The specific types of splints are U-type, H-type, O-type and C-type
The main specifications and models of cable splints are: lju100 & times; 135× 100、LJU100× 155× 150、LJH100× 180× 100、LJH100× 180× 150、LJO125× 180× 120, etc
Unocal cable splint has complete specifications and coal safety parts
It is qualified
It can also be customized according to the customer's size

Contact: Manager Zhang ,
Mobile: 18660826952 (same as wechat)
QQ：2890974168