Natural gas filter separato

  Refinery coalescing oil filter element series coalescing filter element is a filter element which is processed by a variety of composite materials through special processes and has hydrophilic characteristics
It can not only filter out the mechanical impurities in the medium, but also separate the emulsified water from the medium and coalesce into large water droplets through demulsification and coalescence, so as to further realize the purification of the medium

The droplets of oil, water and other liquids are captured by the microfiber inside the coalescer
These micron fibers form a tortuous channel for the air flow, forcing the solid particles and liquid droplets to be captured by the microfiber under the action of three filtration mechanisms: inertial collision, diffusion interception and direct interception
The liquid surface tension makes the small droplets aggregate into larger droplets
Due to the action of gravity, Large droplets settle to the bottom of the container

The glass fiber coalescing filter element is made of high-density gradient glass fiber
In order to reduce damage and leakage, it is designed into an integral single-chip pipe structure
The surface of the filter element is treated with water and oil drainage, which can meet the requirements of various accuracy levels

Polyester fiber coalescence filter element is usually made of polyester fiber synthetic material, which has good compatibility with various fluids
The filter element is spiral wound with multi-layer structure, and each layer adopts fibers with different properties
The expected filtration accuracy is achieved by controlling the shape, size, thickness and density of each layer of fibers

The coalescence filter element mainly selects the surface treated glass fiber or polyester fiber as the coalescence medium
The structure of the filter material is specially designed to make the filter medium have good coalescence performance
The filtering accuracy can reach 0
1-mu; m。 [1]
Product advantages: glass fiber coalescence filter element, high-density gradient glass fiber, high-efficiency coalescence of liquid mist and droplets in gas flow, high filtration accuracy
Stable structure, no medium fiber falling off, and no pollution to the environment and downstream products
Good compatibility with various fluids; Good environmental protection, 100% synthetic material, complete combustion, no residue

Product specification outer diameter: 3
5 inches, 4
5 inches, 6 inches; Length: 16, 18, 20, 32, 36, 40, 72 inch filter element framework material: stainless steel and carbon steel accuracy range: less than 0
3 micron, 0
3 micron, 0
5 micron, 1 micron, 5 micron, 10 micron initial differential pressure: & le; 0
15psig  Replace differential pressure: & lt; 0
6psig  Operating temperature: 0 ~ 150 ℃ [2] 1, aviation fuel, gasoline, kerosene and diesel;
2
Liquefied petroleum gas, stone tar, benzene, toluene, xylene, cumene, polypropylene, etc;
3
Turbine oil and other low viscosity hydraulic oil and lubricating oil;
4
Cyclohexane, isopropanol, cyclohexanol, cyclohexanone, etc;
5
Other hydrocarbons