Nanjing wet and dry dedusting environmental protection polishing machine manufacture

  The key to the operation of environmental protection polishing machine is to try to obtain a large polishing rate, so as to remove the damaged layer during polishing as soon as possible

Polishing is divided into two stages:
1
The purpose of rough polishing is to remove the polishing damage layer
In this stage, there should be a large polishing rate
The surface damage formed by rough polishing is a secondary consideration, but it should also be as small as possible
2
The second is fine polishing (or final polishing), which aims to remove the surface damage caused by rough polishing and minimize the polishing damage

When the polishing machine is working, the grinding surface of the sample and the polishing disc shall be parallel and evenly pressed on the polishing disc, and attention shall be paid to prevent the sample from flying out and generating new wear marks due to too much pressure
At the same time, make the sample rotate and move back and forth along the radius of the rotary table to avoid local wear of the polished fabric too fast
In the polishing process, constantly add polishing fluid or other polishing additives to keep the polished fabric at a certain humidity
Too much humidity will weaken the effect of polishing wear marks, make the hard phase in the sample appear convex and produce non-metallic inclusions in steel and graphite phase in Cast Iron & quot; Trailing tail & quot; Phenomenon; When the humidity is too small, the friction heat will raise the temperature of the sample, reduce the lubrication, lose the luster of the grinding surface, and even appear black spots
The light alloy will damage the surface and appear yellow

 
 
 
The polishing machine is specially used for the effect treatment of the surface and tubes of metal products such as steel, aluminum and copper
It can easily produce various snowflake patterns, wiredrawing patterns, wavy patterns, matte surfaces and mirrors with different accuracy, quickly repair deep scratches and slight scratches, and quickly polish and polish; Weld, nozzle mark, oxide film, stain and paint are suitable for deburring and forming fillet decorative metal processing
They will not form shadow, transition zone and uneven decorative surface in the processing process
They are important equipment for the production of metal products

Sanding and wire drawing of workpieces in wood and furniture industry, such as flat wood, furniture metal handle and so on; Hardware materials and products, aluminum profiles and their products, stainless steel products and utensils, copper profiles and products, plumbing and bathroom equipment, locks, lighting products, signs and nameplates, hardware craft accessories, knives and scissors, movable leaves of doors, auto and bicycle parts, tableware, button products, buttons, belt buttons, mobile phone shell, clock and watch industry and other workpiece sanding and wire drawing; Electronic zero , Electronic equipment, such as electronic parts, flat sanding and wire drawing
It can also be used for wire drawing of mobile phone shell, MP3, digital products, notebook computers and PC boards

Consumables: hemp wheel, cloth wheel, thousand leaf wheel, sponge wheel, wool wheel

size	1610*1600*1800
fan power	1 5kw
pump power	1 5kw
polishing machine 4kw single speed	2800 rpm