Nanjing 16m bridge inspection car rental, Suqian 18m bridge inspection car rental

Nanjing 16m bridge inspection car rental, Suqian 18m bridge inspection car rental Tel
: 180-6251-5888 Roads and bridges are an integral part of the transportation system, and the quality of highway bridges often affects the operation safety and quality of the whole highway
Therefore, bridge maintenance and management is extremely important As we all know, bridge inspection vehicles must be used for bridge maintenance
Next, Nanjing 16m bridge inspection vehicle rental shares a few points on how to do well in tire maintenance of bridge inspection vehicles 　　1
Strictly follow the tire inflation Standard After inflating the tires of the bridge inspection vehicle every time, be sure to check whether all parts of the bridge inspection vehicle have air leakage, and regularly check the tire pressure to meet the relevant specifications
In normal work, we should form the habit of measuring air pressure with a barometer, and we can't simply judge with the naked eye
In addition, the tire should be elastic and not exceed the specified deformation range when accepting the load
The bridge inspection vehicle has excellent stability and comfort during the driving process 　　2
Install the axle inspection Tire The corresponding inner tube shall be correctly selected according to the tire specification of bridge inspection vehicle
The tires assembled on the same bridge inspection vehicle are better to be replaced with the whole vehicle or coaxial tires
If it is a directional striped tire, it shall be installed in accordance with the specified rolling direction
In addition, in order to ensure the driving safety of bridge inspection vehicles, retreaded tires are not allowed to be used as front wheels 　　3
To perform tire transposition The fatigue and wear of the front and rear tires are also different, so the tires should be transposed in time according to the rules
There are two kinds of tire changing methods: cross method and cycle method
Bridge maintainers can change the tires of bridge inspection vehicles in the way they like according to the specific situation 　　4
Temperature of tires for Bridge Inspection During the operation of bridge inspection vehicle, the tire will inevitably produce friction and deformation, bring heat, and increase the temperature and air pressure inside the tire
When the tire temperature, the method of deflating and depressurizing shall not be adopted, and the tire shall not be splashed with water to cool down, so as not to accelerate the damage of the tire
You should stop in a cool place and rest until the tire temperature decreases 　　5
Tires should be stored safely The tires of bridge inspection vehicles shall be prevented from being stored near sunlight, oils, acids, combustibles and chemical corrosives
All tires shall be stored in a cool, dry and dark room
The tires shall be placed vertically
It is forbidden to put them horizontally, stack them or hang them in a string
If the inner tube needs to be stored alone, it should also be filled with appropriate air and cannot be folded, placed flat or stacked
If it is not stored separately, it should also be placed in the outer tire and inflated properly Suqian 18m bridge inspection car rental has the advantages of high availability, good safety, strong adaptability and low power loss
It is applicable to the preventive inspection and maintenance of highway bridges, metropolitan viaducts, railway bridges and highway railway dual-purpose bridges
It also provides safety assurance when detecting each part
It can also be used in occasions where the situation is dangerous and does not meet the manual detection
Rental telephone: 180-6251-5888 Roads and bridges are an integral part of the transportation system, and the quality of highway bridges often affects the operation safety and quality of the whole highway
Therefore, bridge maintenance and management is extremely important As we all know, bridge inspection vehicles must be used for bridge maintenance
Next, Nanjing 16m bridge inspection vehicle rental shares a few points on how to do well in tire maintenance of bridge inspection vehicles 　　1
Strictly follow the tire inflation Standard After inflating the tires of the bridge inspection vehicle every time, be sure to check whether all parts of the bridge inspection vehicle have air leakage, and regularly check the tire pressure to meet the relevant specifications
In normal work, we should form the habit of measuring air pressure with a barometer, and we can't simply judge with the naked eye
In addition, the tire should be elastic and not exceed the specified deformation range when accepting the load
The bridge inspection vehicle has excellent stability and comfort during the driving process 　　2
Install the axle inspection Tire The corresponding inner tube shall be correctly selected according to the tire specification of bridge inspection vehicle
The tires assembled on the same bridge inspection vehicle are better to be replaced with the whole vehicle or coaxial tires
If it is a directional striped tire, it shall be installed in accordance with the specified rolling direction
In addition, in order to ensure the driving safety of bridge inspection vehicles, retreaded tires are not allowed to be used as front wheels 　　3
To perform tire transposition The fatigue and wear of the front and rear tires are also different, so the tires should be transposed in time according to the rules
There are two kinds of tire changing methods: cross method and cycle method
Bridge maintainers can change the tires of bridge inspection vehicles in the way they like according to the specific situation 　　4
Temperature of tires for Bridge Inspection During the operation of bridge inspection vehicle, the tire will inevitably produce friction and deformation, bring heat, and increase the temperature and air pressure inside the tire
When the tire temperature, the method of deflating and depressurizing shall not be adopted, and the tire shall not be splashed with water to cool down, so as not to accelerate the damage of the tire
You should stop in a cool place and rest until the tire temperature decreases 　　5
Tires should be stored safely The tires of bridge inspection vehicles shall be prevented from being stored near sunlight, oils, acids, combustibles and chemical corrosives
All tires shall be stored in a cool, dry and dark room
The tires shall be placed vertically
It is forbidden to put them horizontally, stack them or hang them in a string
If the inner tube needs to be stored alone, it should also be filled with appropriate air and cannot be folded, placed flat or stacked
If it is not stored separately, it should also be placed in the outer tire and inflated properly Suqian 18m bridge inspection car rental has the advantages of high availability, good safety, strong adaptability and low power loss
It is applicable to the preventive inspection and maintenance of highway bridges, urban viaducts, railway bridges and highway railway dual-purpose bridges
It also provides safety assurance when detecting each part
It can also be used in situations where the situation is dangerous and does not meet the manual detection