Mirror stainless steel screen printing ink

  Mirror stainless steel screen printing ink sales manufacturers
I
ink characteristics: bright light has good adhesion to aluminum plate and iron plate, fast drying speed, adhesive resistance and finger scraping without obvious falling off

2、 Scope of application: aluminum plate, iron plate, rough copper plate, smooth iron plate, printed glass, stainless steel, electroplated surface, etc

3、 Physical properties:
1
Printing method: silk screen printing and pad printing;
2
Network performance: 33t-140t

3
Surface drying time: natural volatilization drying and surface drying take about 20-30 minutes;
Practical working time: more than 4 hours (depending on climate and printing environment);
It can be dried and dried with hot air below 100 ÷ degree;
Baking time: 80 ℃ for 10-20 minutes (printed glass, stainless steel plate, very smooth iron plate, electroplating surface)

4
Release agent: hga-100 783;
5
Cleaning agent: 714, 718, net washing water;
6
Printing area: 25-30 ㎡ / kg (120t screen);
7
Product fineness: 5μ following

4、 Chemical properties: it can only be mixed with this series of inks

V
usage:
1
Before use, add 15% - 16% curing agent into the ink and mix it well before printing;
2
The ink with curing agent can be used for 48 hours;
3
8-15% diluent can be added as required;
4
The surface of the substrate must be clean and free of oil, dust, etc;
5
When multi-color overprint, it is necessary to wait for the ink to dry slowly before printing the next color;
6
If the screen is blocked, it can be cleaned with diluent or cleaning agent, and then printed after the screen is dry

Vi
precautions:
1
Different printing materials and environment will affect the printing effect
It is recommended to use in large quantities after trial;
2
Diluents with different drying speeds shall be selected according to different environmental climate;
3
After printing, the products can be overlapped and cannot be pressed again until the ink film is completely dry;
4
When storing and using ink, keep away from fireworks and light;
5
When white ink is added with curing agent, the ink is easy to turn yellow after printing for 4 hours, and it is also easy to turn yellow when baking time is too long or temperature is too high