Meilu ceramic anti-static raised floor manufacturer prices today market service worry free

Meilu ceramic anti-static raised floor manufacturer prices today market service worry free
  Key points for quality control of Melo ceramic anti-static raised floor workers: , 1
Floor works shall include the construction of base course, bonding layer, surface layer and anti-static grounding system 2
The binding course mortar should be dry and hard cement mortar with a volume ratio of 1:3, with a thickness of 25 ~ 35mm, and the surface should be brushed with a layer of cement slurry 3
The resistance reducing agent shall be added into the cement mortar bonding layer according to the proportion
The weight ratio of cement mortar and conductive powder is 1:0
003 4
The conductive copper strip shall be laid on the cement mortar bonding layer with a longitudinal spacing of 600 mm and a transverse spacing of 3000 ~ 4800 mm
After the laying is completed, the conductive copper strip shall be tested with a multimeter to make it all form a path, and the acceptance records of concealed works shall be made 5
When paving Melo ceramic anti-static raised floor, keep it in place horizontally, tap it with a rubber hammer to make it bond closely with the mortar, and adjust its surface flatness and joint width (1-3mm) 6
When paving the floor on the cement mortar bonding layer, the floor bottom shall be clean
Joints shall be set between plates according to the design requirements
The plate shall be closely jointed against the wall, and mortar shall not be used to fill the joint 7
Melo ceramic anti-static raised floor shall be pointed with cement of the same variety, strength grade and color or other high-quality pointing materials, and shall be well maintained and protected
Non dusting jointing materials shall be used for jointing in clean workshop 8
The paved ground shall be flat, the line shall be straight and inlaid correctly
The floor and bonding layer shall be pasted tightly without hollowing 9
The seam width of Melo ceramic antistatic raised floor shall meet the design requirements
When not specified in the design, the width of butt joint shall not be greater than 3mm Meilu ceramic anti-static raised floor is a high-quality product launched by Shanghai Meilu anti-static floor Co
, Ltd
and Jiangsu Beibo decoration for the international anti-static floor field 2、 Product structure composition: , Meilu ceramic anti-static raised floor base: the floor is made of all steel components, the bottom surface is made of deep tensile steel plate, the surface is made of hard steel plate, the upper and lower steel plates are formed by stamping and spot welding, and the four sides are made of advanced welding reinforcement structure
The surface of the floor base is treated by electrostatic spraying after phosphating
The spraying layer material is thermosetting epoxy plastic powder, and the surface is soft, anti-corrosion Wear resistance
The inner cavity is filled with foamed cement Floor tile: , The surface of Melo ceramic anti-static raised floor is pasted with 10mm anti-static ceramics Support system: (support, beam) , Melo ceramic anti-static raised floor adopts four support type
The upper support plate and bottom plate of the support are steel plates, and the lower support is circular or square steel pipes
In order to facilitate installation and adjustment, an adjusting roller is installed on the lower support rod
The support height can be adjusted by adjusting the height of the support roller, and the adjustment range is & plusmn; 25mm
After the support height is adjusted, it can be locked by tightening the nut
The beam is a special rectangular steel pipe, which has the characteristics of good rigidity and strong bearing capacity
The surface of support and beam is galvanized, beautiful and anti-corrosion