Load 3000W intelligent digital display temperature controller heater temperature controlle

  Socket type intelligent temperature controller load: 3000W voltage: 220V temperature control range: - 16 ° to 90 ° temperature control accuracy: accurate to 1 ° digital display accuracy: accurate to 0
1 ° detector head: waterproof metal probe, wire length 5m, weight: 0
4KG (8 pairs) Suitable for: heating plate temperature control, seedling temperature control, electric heating floor heating temperature control, reptile box temperature control, ceramic heating lamp temperature control, fish tank temperature control, turtle pond temperature control, aquaculture temperature control, industrial temperature control, agricultural temperature control and other electric heating and thermal insulation temperature control! Instructions for using the intelligent digital display temperature controller: 1
The temperature controller is plugged into the household electric 220V
Our temperature controller is in the default temperature control mode
Instead of pressing the red setting key in the middle, you can directly adjust it by pressing the up and down buttons below the start temperature and stop temperature
For example, if you want to control the temperature at 32 ℃, adjust the start temperature to 31 and the stop temperature to 32, Put the probe of the temperature controller at the position where you need to know the temperature to detect the temperature
If you detect the temperature you set, the temperature will be constant
The process of controlling the temperature is not accurate
You have to wait until the temperature controller is buffered, because the temperature controller controls the temperature by power failure and power on, which is not changed at all like the computer
Note: the temperature controller can only carry less than 2500 watts
If it is too close to the load, the temperature controller will be hot, It will burn out! Use of time control: F1 is cycle timing, such as 60 minute stop and 60 minute start
The longest time can be set: 99 minute power failure and 99 minute power on
F2 is a timed power failure, and the power will be cut off automatically when the time comes, for example: Set 12 & mdash; 00 (the time is connected on the left and right sides), that is, 1200 minutes = 20 hours
When the power is on for 20 hours, the power will be cut off automatically
There is no cycle function
The longest time can be set: 9999 minutes = 166 hours
F3 is power on regularly and automatically when the time comes, such as setting 12 & mdash; 00 (the time is connected on the left and right sides), that is, 1200 minutes = 20 hours
When it is powered on for 20 hours, it will be powered on automatically
There is no cycle function
The longest time can be set: 9999 minutes = 166 hours