Ky-6075 full hydraulic prospecting drill for metal mines can take cores with steel cables

  Buy a drilling rig and choose Jujiang
A good drilling rig can save time, labor and cost for your project
Jujiang Group specializes in drilling rigs
The company supplies all kinds of high-quality drilling rigs for a long time, and warmly welcomes new and old customers to negotiate business
Welcome to call and inquire: ① ⑦⑧ ⑤ ⑦ ⑨ ③ zero ⑦
Product keywords
Ky-6075500m; Full hydraulic steel wire coring exploration rig and full hydraulic steel wire coring tunnel exploration rig are used in metal mines

1、 Model description of ky-6075 wireline coring exploration rig
K: Tunnel; Y: Hydraulically operated mechanical transmission; 60mm-75mm: drilling rock aperture

2、 Working conditions of ky-6075 wireline coring exploration rig
  The full hydraulic wire rope coring exploration rig is suitable for the chamber with complete roof, no broken, no quicksand and no support

1
Horizontal forward drilling: the chamber is required to be 2000mm high * 2000mm wide;
2
Horizontal horizontal drilling: the chamber is required to be 2000mm high * 4000mm wide;
3
Vertical up-down angle drilling: the chamber is required to be 4000mm high * 2000mm wide 3、 Characteristics of ky-6075 wireline coring exploration rig
1
Small size, light weight, convenient installation, 360 DEG; Drill wire rope for coring in an all-round way, and lift the core without lifting the drill pipe

2
It consists of three parts: main engine, pump station and console

3
It can be put into production in the original transportation and exploration roadway, which plays a protective role in the overall structure of the mine
It can also be used for surface 0-90 degree drilling

4
The drilling rig is arranged flexibly, and the mechanized twisting and unloading of drill pipes can reduce the labor intensity of workers and improve work efficiency

5
The box type feeding frame is adopted, the gripper is tightened, the power head rotates for drilling, and the oil cylinder pulls the drilling tool, eliminating the cumbersome drill tower

6
With linkage function, it is controlled centrally through the console, which is simple and safe, and can adjust speed steplessly

7
Hollow shaft design, the length of drill pipe is not limited by the drilling process

8
Good disassembly and convenient relocation and transportation& Phi; 49-Φ 60-Φ The 75 drill bit can be used on the same machine, and it only takes 15 minutes to replace it

9
Centralized operation console for oil pump, water pump and power supply

10
The pull-out column is suitable for tunnels with different heights

11
The imported oil gauge line can bear high and soft pressure, reduce the impulse of high-pressure oil pulse, make the pointer of hydraulic oil gauge more stable, and timely detect the changes of strata and rocks in the hole

12
Special customized oil temperature cooler, high-pressure oil cooling fast, low-temperature use, can protect the service life of motor, oil pump, rubber seals

4、 Advantages of ky-6075 wireline coring exploration rig
1
Reduce the auxiliary time of lifting drill pipe and increase the pure drilling time
The deeper the drilling, the more significant the economic effect is

2
Reduce the physical labor of workers

3
Core plugging can be immediately fished to improve the recovery rate of rock core

4
Reduce the wear of drill pipe thread during screwing and unloading, prolong the service life of drill pipe and reduce pipe consumption

5
Reduce the opportunities of bit cleaning wear, screwing and unloading and collision with the hole wall, and prolong the service life of the bit

6
Reduce the imbalance between flushing fluid suction and hole wall pressure, so as to reduce accidents in the hole

7
Reduce the mechanical wear of lifting and sending drill and increase the service life of drill

8
Reduce the bending of drilling hole and improve the drilling quality

9
It is conducive to drilling complex formations and avoiding hole wall collapse

10
The steel cable can be used to set an inclinometer in the drill pipe to measure the inclination

5、 Technical parameters of ky-6075 wire rope coring exploration rig
Drilling angle: tunnel, surface, 0-360 degrees

Drilling depth: steel drill pipe 46mm*600m;
  Steel drill pipe 56mm*550m;
  Steel drill pipe 71mm*500m

Spindle revolutions: 800--1060 rpm  

Spindle output torque: 184-550n M (torque platform test)

Rated feed force: 60kn (torque platform test)

Feeding process: 900mm  

Motor power: oil pump motor 55kW; Water pump motor 11kw

Motor model: l6v80 (Guizhou Liyuan)

Oil pump model: 80ycy14-1b   Plunger pump 10tcy14-1b

Host weight: 380kg

Host size: 1600mm long * 300mm wide * 400mm high

Weight of console: 60kg

Size of console: 610mm long * 530mm wide * 1150mm high

Power car weight: 550Kg

Size of power car: 1340mm long * 560mm wide * 1010mm high

6、 Drilling tool parameters of ky-6075 wireline coring exploration rig
1
Drill pipe 46mm, core tube 48mm, drill bit 49mm, reamer 49
5mm, take out core 29mm

2
The drill pipe is 56mm, the core tube is 58mm, the drill bit is 60mm, the reamer is 60
5mm, and the core is 41
5mm

3
Drill pipe 71mm, core tube 73mm, drill 75mm, reamer 75
5mm, take out core 49
5mm

  Shandong Jujiang Machinery Group Co
, Ltd
promises to send technicians to the site (domestic) for installation and commissioning training free of charge
The warranty period is half a year
If it is not artificially damaged within half a year, the parts will be replaced free of charge

Shandong Jujiang Machinery Group Co
, Ltd
specializes in supplying all hydraulic exploration rigs for metal mines, with the main models of KY-150, ky-150a, ky-200, ky-250, ky-300, ky-6075

Shandong Jujiang Machinery Group Co
, Ltd
Business Manager: Huang Hailuo
Mobile: 17853793007
QQ：2979324583
Landline: 0537-3860909
National free sales hotline: 400-167-0537
Enterprise *: http://www
sdjujiang
com
Alibaba: http://jujiangzj02
1688
com