Kaifeng fitter platform

Fitter platform , Fitter plate is mainly divided into fitter assembly platform, fitter marking platform and fitter inspection platform
Fitter platform: T-shaped groove is processed on it, which is mainly used to fix workpieces
Fitter platform is the basic platform for fitter to debug equipment, assemble equipment and repair equipment
Fitter platform: it is suitable for various inspection work and datum plane for precision measurement
Fitter platform is used for machine tool mechanical inspection and measurement datum, check the dimensional accuracy or behavior deviation of parts, and make precise marking
Fitter platform is also an indispensable basic tool in mechanical manufacturing inspection

Quality inspection of fitter platform: http://www
btdhjx
com  ; http://www
cxljjx
com
1
Fitter platform
2
The working surface of cast iron fitter platform shall be free of casting defects such as sand hole, air hole, crack, slag inclusion and shrinkage porosity
The molding sand shall be removed from various casting surfaces, and the surface shall be flat and firmly painted
All edges shall be blunt
When the accuracy level is lower than & ldquo; 00” On the flat working surface of grade, sand holes with a diameter less than 15mm are allowed to be blocked with the same material, and their hardness shall be lower than that of the surrounding materials
There shall be no more than four blocked parts on the working surface of fitter platform, and the distance between them shall not be less than 80mm
3
Threaded holes or cylindrical holes for installing lifting facilities such as handle and lifting ring shall be set on the opposite two sides of cast iron platform
When designing the hoisting position, it shall be considered to minimize the changes caused by hoisting http://www
dhjxcj
com
4
According to the user's requirements, after setting threaded holes or grooves on the working surface of the plate, these parts shall not be raised higher than the working surface
5
The bench work platform shall be made of high-quality fine-grained gray cast iron or alloy cast iron
6
The hardness of working surface of cast iron platform shall be HB 170-220
7
The working surface of fitter platform shall adopt scraping process, for & ldquo; 3” The planing process can also be adopted for grade I flat working surface
The surface roughness of the planing working surface shall not exceed 5um according to the arithmetic mean deviation Ra of the contour
8
The fitter platform shall be subject to stability treatment and demagnetization

Fitter platform specification: 200 & times; 200— 2000 * 4000mm (special specifications shall be made and processed according to the buyer's drawings or processed and produced by both parties through negotiation) Donghe machinery professional entity manufacturer directly sells the fitter platform
The enterprise provides customers with fitter platform parameters, fitter platform pictures, fitter platform quotation and detailed introduction
When ordering the fitter platform, call 15530474500
The working surface shall be free of rust, scratch, bruise and other appearance defects affecting the use