Jtcsg2500 infrared thermomete

  Thank you for choosing the jtcsg2500 infrared thermometer provided by our company
Jtcsg2500 infrared thermometer is composed of infrared optical lens, filter, sensor, electrical signal processing unit and laser
It can detect the infrared radiation from the measured target and determine the temperature of the aiming target according to its radiation intensity

Jtcsg2500 infrared thermometer provides three wire 4-20mA current output, which can be easily installed in a variety of applications
It is especially suitable for installation in industrial environment requiring long distance and strong interference

Jtcsg2500 infrared thermometer adopts copper plated soldering shell, which has good protection ability in industrial site

Tip: read this manual carefully before use
The manufacturer reserves the right to change the product parameters in case of technological progress

technical indicators
basic performance
warranty , protect	IP65(NEMA-4)
operating temperature	0－60℃
storage temperature	-20－80℃
relative humidity	10-90% (no condensation)
shell material	copper plating
cable length	3M, or customized
electrical parameters
working power supply	12－24VDC
heavy load	750 ohms (24VDC)
output signal	4-20mA
measurement parameters
spectral range	0 8-1 0um
temperature range	700－2500℃
optical resolution		100:1
response time		30ms（95％）
temperature measurement accuracy		± 1％
(ambient temperature: 23 ℃ & plusmn; 5 ℃)
repetition accuracy		± 0 5%
(ambient temperature: 23 ℃ & plusmn; 5 ℃)

 
An , pretend
Mechanical installation
Jtcsg2500 metal shell with M27 & times; The thread of 1
5 can be used for direct installation or by using the installation support
The adjustable installation support can make the adjustment of the measuring head more convenient

When adjusting the measured target and measuring head, it must ensure that the optical path is not blocked

Electrical installation

Red	Black	yellow	* layer	Brown	white Td = "71" width = "Val"> grey
24V power supply positive		current output positive	current output negative	RS485+	RS485-	RS485 ground wire