Jiusheng mechanical diesel three wheel truck mounted crane flat plate truck agricultural three wheel

  The three wheeled truck mounted crane is an engineering vehicle integrating hoisting, loading and transportation
It was recognized by the majority of users shortly after it was launched on the market
Its performance in practical application fully meets the needs of customers, especially the convenience of sand pulling on the sand field, garden transportation, earthwork transportation and transfer, which has this amazing efficiency
The chassis is refitted with Wuzheng three wheels, which can carry out 360 & deg; Rotation, easy to do, welcomed by our customers
 
 
 
 
 
 
 
 
Operation safety matters:
 
1
Before the operation of the three wheeled truck mounted crane, the steel wire rope, clutch, brake, safety ratchet and transmission pulley must be checked first

 
1
During operation, the steel wire rope shall be kept in the drum for at least three turns

 
1
During operation, no one is allowed to cross the wire rope of the winch, and the wire rope is not allowed to be dragged smoothly

 
4
During operation, it is strictly prohibited to leave the work post without authorization, and other people are not allowed to open the machine arbitrarily

 
5
Listen to the commander's signal during work
When the signal is unclear or may cause an accident, the operation shall be suspended and the operation can be continued only after the situation is clear

 
6
In case of sudden power failure during the operation of the three wheeled crane, the break point of the switch shall be opened immediately and the transported objects shall be put down

 
7
The lifting command shall be performed by skilled personnel who know the performance of lifting machinery, and the signal shall be accurate, loud and clear

 
8
The speed of the lifted object shall be uniform
Sudden braking and direction change are prohibited
When translating, it shall be more than 0
5m higher than the obstacle
When falling, it shall be placed gently at a low speed to prevent dumping

 
 
 
 
 
How to select the elevator cable in the process of truck mounted crane
 
(1) The cable shall have a conductor of sufficient section for maintenance grounding

 
(2) aluminum clad cables are strictly prohibited for tower crane cables
 
(3) the theoretical laying level of cables shall conform to the regular allowable laying level of cables

 
(4) the tower crane cable must be flame retardant cable that has passed the inspection and obtained the safety mark of construction elevator products

 
(5) the section of the main cable core shall meet the requirements of the load of the power supply line

 
(6) cables for lighting, communication, signal and control
Copper cable or MVV plastic cable shall be used

 
Instructions
On the construction site, both the truck mounted crane and the construction elevator use the motor to stop the drive
The power supply lines are generally large square copper cables, which have much less disadvantages than ordinary cables
The working environment on the construction site is poor
The cable line selection of the tower crane construction elevator is more important than en's
Tower crane cable request is the basis for selecting cable model
On the premise of complying with this request, reasonable selection shall be made according to the detailed conditions of the construction site, the length and load of the power supply site from the tower crane and construction elevator

 
Tower cranes are often seen on construction sites
When you see them, you feel that human beings are really grand and can invent something that can improve our work efficiency
Have you thought about how tower cranes were developed? Let's talk about the development process of tower crane

 
1
Formulate demand analysis
According to the function, performance, operating environment and other elements, work with customers to formulate detailed user requirements specifications, so as to affirm the development purpose

 
2
Preliminary scheme design
According to the demand analysis, suspend the formulation of the scheme, including function and parameter setting, basic calculation, preliminary three-dimensional general drawing, etc
, and then suspend the preliminary inspection with the customer

 
3
Detailed scheme design
Listen to the preliminary review opinions and implement the scheme design
Modify and refine the general drawing of 3D model, draw the 3D drawing of parts, and suspend the finite element analysis and dynamic simulation of structural components
And then suspend the secondary inspection with the customer

 
4
Scheme confirmation and drawing drawing
Listen to the opinions of the second instance and revise the scheme design
Draw the plan, and draw out the parts list and vulnerable parts list

 
5
All manufacturing technologies, including publicity, technical samples and product application
 
contact us