Jiupeng high efficiency formaldehyde removal visible light absorbable photocatalyst 5nm nano titaniu

  5nm titanium dioxide photocatalyst
  Technical indicators:

project	index
model	CY05
Powder appearance	White powder
Appearance of powder dissolved in water	Transparent liquid
Particle size	& lt; 5nm
purity	99 9%
Surface properties	Hydrophilic

 
usage method:
  Use distilled water and deionized water to make cy05 powder into an aqueous solution with a solid content of 1-2%, and spray it on the wall and ceiling
It is required that the atomization effect is good, there are no water droplets, and the formaldehyde index and odor index can meet the standard within 24 hours
Those with strong smell can be sprayed twice more
(it is recommended to gently and evenly wipe the furniture inside and outside with a clean towel dipped in water for 2 times
The towel should be wet for the first time and dry for the second time
The same is true for the floor, or use a clean mop to mop it evenly)
matters needing attention:
1
Dark furniture, bright painted furniture and household appliances need to be covered with cover cloth (or disposable plastic tablecloth) respectively to prevent excessive settlement of chemicals during construction

2
Start ventilation after spraying
If there are a lot of indoor furniture and formaldehyde volatilizes rapidly and has a high concentration, it is recommended to spray more times to improve the degradation rate

3
Paint spray gun is generally used when spraying, with good atomization effect, which will spray more evenly and improve efficiency

4
Before spraying, clean the coated surface, cover the objects that are not suitable for spraying, and the spray gun should be 30-45cm away from the coated objects

5
The natural drying time of the film is about 15-20 minutes, and the curing takes 48 hours
Do not scrub vigorously before complete curing
6
When used for sewage treatment, cy05 is dissolved with a small amount of pure water, and then added to the sewage
It is recommended to take the water behind the secondary sedimentation tank and in front of the biochemical tank
The sewage with better transparency has more obvious treatment effect, and it is more suitable to treat the sewage after inorganic precipitation treatment
The dosage is about 100g of cy05 powder for one cubic meter of sewage