Hydraulic pump station guide rail shear fork platform automobile lift

Henan Chaowei Hydraulic Machinery Manufacturing Co
, Ltd
http://www
cwyyjx
com/
  According to the structural characteristics of hydraulic pump station, the pump station is divided into two parts: oil tank and oil pump motor unit, which are installed on a common base
A rotary ball valve is installed in the oil suction pipeline to cut off the oil in the box during maintenance
The oil tank cover plate is closely connected with the box with bolts and gaskets to make the oil tank a sealed container
Cartridge valve block, return oil filter, air oil filter, pressure gauge, etc
are installed on the box cover
The design of the oil tank ensures the cleanliness of the oil
The pressure values of the front and rear chambers of the gate or valve oil cylinder can be measured respectively through a multi-point pressure gauge switch and a pressure gauge
A cleaning window is set in the middle of the front of the oil tank to facilitate maintenance
The tank is equipped with a diaphragm and a filter screen, which divides the tank into an oil return area and an oil suction area
Specification of hydraulic pump station: 3kw60l oil tank / 3kw80l oil tank / 4kw60l oil tank / 4kw80l oil tank / 5
5kw100l oil tank / 5
5kw135l oil tank / 7
5kw135l oil tank / 7
5kw150l oil tank
The specifications of the hydraulic pump station are as above, and customization is not supported
For details, please consult the customer service or call!!