Huzhou powder generation processing, Jiangsu powder generation processing

  What should we pay attention to in the maintenance of the crusher? The maintenance of Chao micro crusher is an extremely important and regular work
It should be closely coordinated with the operation and maintenance of Chao micro crusher, and full-time personnel should be on duty for inspection
Chao micro pulverizer is an equipment that uses air separation, heavy pressure grinding and shearing to realize Chao micro pulverization of dry materials
Let's take a look at the maintenance of Chao micro pulverizer:
1
The bearing bears all the load of the machine, so good lubrication has a great relationship with the service life of the bearing
It directly affects the service life and operation rate of the machine
Therefore, the injected lubricating oil must be clean and the seal must be good
The main oil filling place of the machine (1) rotating bearing (2) roll bearing (3) all gears (4) movable bearing and sliding plane
2
The newly installed tire is easy to loosen and must be checked frequently
3
Pay attention to whether all parts of the machine work normally
4
Check the wear degree of easily worn parts and replace worn parts at any time
5
Dust and other objects shall be removed from the underframe plane of the movable device to prevent the movable bearing from moving on the underframe when the machine encounters unbreakable materials, resulting in serious accidents
6
If the bearing oil temperature rises, stop the machine immediately to check the cause and eliminate Chu

7
If there is an impact sound when the rotating gear is running, stop the machine immediately for inspection and eliminate Chu
Chao micro pulverization technology is a technology developed and widely used in recent decades
At the same time, Chao micro pulverizer industry has also developed rapidly, especially in the pharmaceutical industry, which has been more widely used, and the future development prospect is very promising
Chao micro comminution technology is a new technology developed in the world in recent decades
At present, it has been successfully applied in many industries such as chemical industry, medicine, machinery and so on
In particular, Chao micro crushing products produced by vibration have the advantages of fine crushing particle size, no pole separation, closed production process, no pollution, no loss of nutrients and so on
It is understood that Chao micro crusher has no pollution, low loss and low consumables
It is all made of stainless steel, avoiding the entry of other media; The structure of the whole machine is smooth, the materials are crushed and collected fully, and the loss is reduced; The grinding wheel rail is made of special Chao hard stainless steel, which is not easy to wear and has long service life, so as to reduce the service cost