Huaxin air conditioner (Figure), Binzhou hot water heate

/ Table>> The utility model solves the problem that freezing may occur at the mine wellhead or in the factory workshop due to the low temperature in winter
The working environment temperature shall be controlled above 2 ° C to effectively prevent freezing and ensure safe production Industrial air heater is suitable for ventilation and heating in various industrial and mining enterprises
The heat medium is 0
2-0
4mp steam and 95-130 / 70 ℃ hot water
It has reasonable structural design, convenient installation, stable performance, convenient use and management, obvious energy-saving effect, beautiful appearance and long service life

The main purpose of fuel air heater is to heat industrial or commercial places
It is also used to dry some products or meet process requirements
As the name suggests, the heater heats the air
At present, there are various heating methods: floor heating, radiation, warm air, convection and so on
There are also many energy options, such as traditional coal-fired, universal electric heating, and the current rise of oil and gas heating
Among various heating methods, air heating is more comfortable, and air heater is the most common air heating method
The air heater can provide clean and dry hot air to heat the whole space with uniform temperature
The machine can be divided into desktop, vertical and wall mounted
The desktop heater is small and exquisite, the vertical heater has smooth lines, and the wall mounted heater saves space
The heater is generally beautiful and exquisite in shape
It is equipped with red, dark gray, blue and other popular color shells, which makes the heater quite fashionable
However, when purchasing the heater, the safety guarantee should also be put in the first place
For example, whether the machine has the protection device against overheating and overcurrent, and whether it has the dumping power-off function, especially the bathroom heater, must be waterproof and splash proof
Therefore, it is necessary to carefully check whether there are waterproof signs on the machine
It should be noted that the products with the Great Wall certification mark issued by China Electrotechnical Commission have good quality assurance
Not seeking the most satisfactory style, but the best internal quality and safety guarantee is the key to the selection of heater

1、 The heater shall cooperate with the responsive heat medium management system, and a water cut-off valve shall be installed on the return branch pipe of the heater, and a bleeding device shall be installed on the whole pipeline system
2、 The heat medium pipeline system shall be cleaned before it can be connected with the heater
There shall be a drain valve under each heater
In order to adjust the water flow of each heater in the system, the system design is preferably the same program
3、 The hot water temperature of GS air heater shall be kept above 80 ℃ - 90 ℃ and not lower than 75 ℃
Its water flow must keep the water velocity in the heat dissipation discharge pipe above 0
2m/s
4、 After the heater has been used for 2-3 years, the scale in the drainage pipe shall be removed by chemical method
In order to reduce scale, the hot water used shall be softened
When the heating season is stopped, the pipeline system shall be filled with water to reduce the corrosion of the provincial capital
5、 See the manual for the specific installation form of hot water heater

place of origin:	Texas
heating method:	carbon tube radiation heating
use method:	vertical
heating gear:	first gear
can be timed:	can not be timed
applicable to bathroom:	not applicable to bathroom