Hefei ozone reaction tank stainless steel ozone adsorption tank integrity management

  Working principle of ozone mixing tower: ozone enters the bottom of the oxidation tower through the pipeline, passes through the aerator and emits another micro bubble through the microporous bubbler
The bubble fully dissolves the ozone in water in the rising process
Water is scattered from the top of the ozone tower and flows away naturally from the top of the ozone tower
The meeting gave sufficient time for ozone to mix with water
The sterilization effect is more bottom tested, and the top is equipped with tail gas discharge and overflow port, so that the excess ozone will not stay indoors
Affect staff production
After the overflow port is full of water in the mixing tower, the water will not flow back to the ozone generator and damage the ozone generator

So far, it is almost a good mixing scheme
It is recognized that large beverage enterprises such as Coca Cola and Master Kang widely use ozone mixing tower
Under the condition of constant ozone equipment, the mixing efficiency is greatly improved

Ozone mixing tower is widely used in:
Production of purified water, mineral water, mountain spring water and beverage water
Sterilization of vegetables, fruits and meat foods,
Sterilization and preservation of mineral water, purified water and tap water;
Sterilization of aquaculture water to effectively inhibit aquatic diseases;
Sterilization and decolorization of sewage; Pool water purification

 
1、 Introduction to ozone aeration tower
Ozone mixing tower is also called ozone contact mixing tank and ozone aeration tower
Its working principle: ozone enters the bottom of the oxidation tower through the pipeline, passes through the aerator and emits another micro bubble through the microporous bubbler
The bubble fully dissolves the ozone in water in the rising process
Water is scattered from the top of the ozone tower and flows away naturally from the top of the ozone tower
The top is equipped with tail gas discharge and overflow port, and the excess ozone will not stay indoors
Affect staff production
When the water inside the mixing tower at the overflow port is full, the water will not flow back to the ozone generator and damage the ozone generator

2、 Working principle of ozone aeration tower
  Ozone mixing tower is also called oxidation tower
Ozone sterilizer is a commonly used sterilization equipment in water treatment system
The sterilization effect is related to the content of ozone, and the contact time between ozone and water is related to the ozone gas distribution head
Generally speaking, the longer the contact time between ozone and water, the more fully mixed, the better the ozone sterilization effect and the smaller the air hole of the gas distribution plate, The smaller the ozone is cut into bubbles, the larger the contact area between ozone and water, so the mixing effect is better and the sterilization effect is better

3、 Advantages of ozone contact tower
  In order to make ozone and water have sufficient mixing area and mixing time, we need to have enough mixing space
Generally, our ozone mixing time is 5-10 minutes, so we need to design the space of ozone mixing tower according to the mixing time and flow
When the space of ozone mixing tower is determined, generally in order to make the convective mixing of ozone and water components, The water enters from above while the ozone enters from below
We design that the distance between the water inlet and the ozone inlet is more than 3500mm, so that the ozone and water have sufficient mixing time and space to achieve the sterilization effect

Ozone mixing tower, also known as oxidation tower, is mainly used for the follow-up sterilization and disinfection of purified water production equipment and mineral water production equipment, and uses the sterilization function of ozone to maintain the effect of water quality
Under the condition of constant ozone equipment, the mixing efficiency is greatly improved