Hebei three primary color cold light xsl-dsr-4*55w

  Model: xsl-dsr4*55w   Power: 220W color temperature: 3200/5600k color rendering index: ra≥ 95 product type: soft light ballast: imported OSRAM ballast / domestic ballast optional lamp tube: OSRAM 32-930/954   Lamp angle: American 1324 type, reflector: high brightness mirror stainless steel, weight: 6
5kg
Three primary color cold light lamp (also known as three primary color soft light lamp) has changed the shortcomings of traditional thermal light source lamps, such as low luminous efficiency and high temperature, and reduced the heat by more than 90% compared with thermal light source lamps
This series of lamps and lanterns are suitable for all kinds of large, medium and small studios, recording and broadcasting classrooms, lesson shooting classrooms, distance education recording and broadcasting rooms, training classrooms, the top lights of the leadership seats on the rostrum, the top lights of the audience seats, multi-function halls, and when the Office is transformed into a studio, lamps and lanterns, senior clubs and other places that need lighting are preferred
The three primary color soft light / cold light lamp has accurate color temperature and high color rendering index, which fully meets the requirements of professional photography
The lamp body is made of high-quality cold-rolled steel sheet, which is light and durable
The lamp body is lighter and thinner
At the same time, the weight of the lamp body is reduced, and it can be easily embedded in the ceiling
In addition to reflectors, all of them are painted in white, which can be matched with ceilings of various colors
It is natural and generous! Long service life: the service life of the lamp tube is up to 10000 hours, which is 60 times that of the existing thermal light source lamps
Low temperature: the surface temperature of the lamp tube is low, so that the irradiated object has almost no temperature rise
Low power: it can save more than 70% of the point energy than the thermal light source lamps
Accurate color temperature: high color restoration rate, color rendering index of lamp tube reaches 95-100, and color temperature is 3200k/4000k/5600k
Soft light: soft light, no stroboscopic, no noise, no radiant heat, no strong dazzling phenomenon, so that the illuminated personnel are comfortable and relaxed
The lamp body is made of aluminum alloy extruded profiles and steel plates
The lamp body structure is a double sandwich structure, and all components are made of professional molds
It has good firm performance, beautiful appearance, novel design, and good ventilation and heat dissipation performance
The lamp holder and lamp trailer are imported parts, which are safe and reliable
The lamp holder adopts a quick locking device to facilitate lamp tube disassembly
The interface adopts high-quality brass, which has the characteristics of good conductivity, anti spark, arc high temperature resistance and good contact
The surface of the lamp body is sprayed with high-temperature powder, which is non reflective
Strong adhesion and   It is corrosion-resistant and not easy to fall off under long-term high temperature, and can effectively resist scratching of hard objects Instructions for use: 1
Installation of support frame: align the standard U-shaped bracket of the lamp with the fixed screw holes on both sides of the lamp, tighten the supporting screws, and install the metal base of the U-shaped bracket; 2
Tear off the protective film: before formal use, please tear off the protective film on the surface of the reflector of the lamp (except for the test lamp), so as not to affect the luminous effect; 3
Install the lamp tube: put the end of the lamp tube vertically into the stainless steel U-clip with the right hand, and rotate it by 90°, Make the lamp pin parallel to the lamp base on the lamp box; Press the red button on the lamp holder with the left hand, and put the four pins of the lamp into the lamp holder slot to secure the lamp on the lamp holder; 5
Installation of lamp holder: install the lamp onto the lamp holder, tighten the screw on the side of the metal base, fix the lamp, and adjust the irradiation direction by adjusting the screw on the side of the lamp; 6
Power on: insert the power line into the jack on the lower side of the lamp, and connect the 220V power supply
Each switch can control two lamp tubes to freely adjust the overall brightness of the lamp; 7
Adjust the light effect: open the four leaf reflector of the lamp, and control the direction, reflection, softness and dispersion of the light by adjusting the included angle between the reflectors;