Hebei plastic steel belt iron crushe

Hebei plastic steel belt iron Crusher The company hereby solemnly recommends the plastic steel crusher for you, so that the plastic steel can be reused after crushing
The rotor of the pulverizer adopts wear-resistant hammer, which is super wear-resistant and durable
The crusher can not only crush plastic steel, but also crush plastic steel profiles, plates, gusset plates, large plates, large and small upper and lower water pipes, wallboards, etc
materials with films on plastic steel are also crushed
It can be separated, and the separation effect can reach more than 95
The iron in waste plastic steel can also be crushed and separated
The crushing thickness can be adjusted conveniently
It can be crushed into fragments according to the needs of materials and users
The crusher is equipped with a fan to discharge the material forcibly
After crushing, it can be directly put into the warehouse or bagged
It has complete sizes and models
It has the advantages of crusher
The crusher has the advantages of low noise, simple structure, compact layout, low price, stable operation, low energy consumption and high output Low processing cost
Structure principle of pulverizer: the main machine of pulverizer is composed of rotor, upper body and lower body
The crushing chamber adopts multistage crushing process and fine crushing principle device, which is characterized by large working impact, high production efficiency and strong fine crushing capacity
The whole pulverizer is composed of main machine, fan, cyclone separator, etc
The structure of each component is compact and the layout is reasonable
It is outstanding, especially for its convenient operation, complete use and good sealing
The pulverizer is different
It can easily crush plastic steel and iron at the same time, and then separate iron and plastic through strong magnetism
It is your ideal special crushing equipment for iron removal of plastic steel How much do you know about the maintenance of plastic crushing equipment? As follows: 1 The plastic crusher shall be placed in a ventilated position to ensure that the working heat of the motor is dissipated 2 Regularly fill the bearing room with lubricating oil The screws of Dao should be checked regularly
When the new plastic crusher is used for 1 hour, fasten the screws of moving and fixed knives with tools to strengthen the fixity between the blade and the tool holder
4 Always check Dao tools to ensure their sharpness and reduce damage to other parts caused by blunt blade
5 Before the Er first start-up, the remaining crushed materials in the machine room shall be cleared to reduce the start-up resistance
The inertia cover and pulley cover shall be opened regularly to remove the ash outlet
7
6 keep the machine well grounded Regularly check whether the plastic crusher belt is loose and tighten it in time