General breaking method of large rock splitting machine

  Principle of large-scale hydraulic rock splitting machine: it uses the characteristics that the tensile strength of rock is far lower than the compressive strength, and applies the principle of wedge block to put the wedge module of the splitting machine into the borehole
The hydraulic pressure provides power to force the rock from inside to outside and destroy the internal structure of the rock, so as to achieve the purpose of rock splitting, and fill the technical gap that the project can not be blasted, the rock is too hard, and the crushing hammer is not enough to break
There is no splitting destructive force compared with * - * (the hydraulic power of 24MPa can produce 3600 tons of splitting force), which is not affected by the environment, * can be stable, simple and pollution-free
It is a good choice for hydraulic splitting machine at present
Farun large rock splitting machine has the technical potential and excellent manufacturing technology to adapt to various harsh working conditions
Farun large rock splitting machine (also known as splitting machine or stone splitting machine) is mainly composed of oil cylinder, piston rod, control valve, oil pipeline, wedge, etc
it is installed on the excavator and takes the excavator's own hydraulic system as the driving source, Only the pressure of 24MPa (240kg / cm2) can produce 2600-3600 tons of splitting force (at present, * - * equipment that has been tested by the market to reach this technical parameter)
According to the destructive test data, the demolition efficiency of the splitting machine is more than 5 times that of the crushing hammer on rocks with Mohs hardness greater than 7
The rock crushing in the foundation pit of modern buildings is faced with the problems of not * - * *, too hard rock and low efficiency of crushing hammer
The combined operation of drilling machine, Hairun large rock splitting machine and crushing hammer is not only a good solution, but also a good equipment combination to save cost and improve operation efficiency
If this joint operation mode is adopted for a large earthwork project, the profit will increase by more than 10 times
This operation mode has entered the field of Engineering demolition strongly
It is a * * equipment to save cost and improve operation efficiency

General demolition methods: 1
Manual demolition 2
Demolition by crushing hammer 3
Cement expansion agent 4
Static blasting 5
Air pick 6
Negative environment of hydraulic splitting machine: 1
Narrow space; 2
Load bearing requirements 3
No large vibration; 4
Underwater; Objective requirements: 1
Time requirements; 2
Social requirements; 3
Economic requirements; 4
Manpower requires that all demolition methods have objective conclusions, which I will not repeat here
Focus on the new large rock splitting machine, also known as airborne splitting machine
The large airborne splitting machine uses the hydraulic system of the loader to drive the work, fully realizing full automation, full compression and efficient operation
Height of airborne splitting machine: 3M; Weight: 550 kg* Head length: 1
5m, drilling depth: 2m
Diameter: 10 cm

Splitting force: 3800 tons, one-time cracking, 10-20 cubic meters
The rock surface with large amount of broken rock is 2m away from the flying surface, the plane fracture is 3
54M, and the vertical depth is 5m

Have you encountered the following problems?
1: There are buildings around the project, which can not be blasted
What if the efficiency of the crushing hammer is too slow?
2: The rock is too hard to be solved by other rock splitting techniques?
3: The splitting force of other hydraulic splitting machines in the same industry is too small and often fails, affecting the efficiency

If you have the above questions, don't hesitate to choose our Hairun brand super large rock splitting machine!
 
Welcome to Dongguan farun Machinery Co
, Ltd
, which is mainly engaged in engineering machinery products such as splitting machine, plunger splitting machine, airborne splitting machine, splitting rod, hydraulic splitting machine, hydraulic splitting machine, rock splitting machine, rock splitting machine, rock splitting machine, splitting machine, rock cutter, hydraulic rock drill, hydraulic rock drill trolley and down the hole drill, It is a comprehensive enterprise integrating the development, design, production, manufacturing, sales and after-sales service of concrete structure drilling, demolition and splitting equipment
It is a * - * technology enterprise and industry standard formulation enterprise in Dongguan

The registered capital of the unit is less than RMB 1 million yuan

“ Because * note, so * Industry & rdquo;, Our company will, as always, spare no effort to produce * quality products for you
Welcome new and old customers to understand