Fermentation tank manufacturers supply Shanghai Baoxing 5BG off-site sterilization magnetic stirring glass fermentation tank full-automatic fermentation equipment

nominal volume	1 / 2 / 3 / 5 / 7 / 10L
Speed	50~1000rpm ± 5rpm
power	1
Brand	Shanghai Baoxing
model	5BG

Indicators and configuration:
Tank system: the tank cover and bottom are made of SUS316L high-quality stainless steel, the tank body is made of high-temperature silicon boron glass, the liquid filling coefficient is 70%, the process structure is advanced, and the operation is simple
Mixing system: the upper suspension strong magnetic mixing system is adopted, no mechanical seal is not easy to leak, and there is no thimble at the bottom
High quality aluminum alloy motor and imported governor are adopted to ensure stable speed; High performance mixing paddle, defoaming paddle, stepless speed regulation
All the inner parts of the tank are installed on the tank cover, which is very convenient for maintenance and cleaning; The height of the special standard paddle for fermentation is adjustable, and different types of paddles can also be changed according to the special requirements of the fermentation process
The design of separating the motor from the tank greatly reduces the weight of the tank, makes the operation easier and convenient, and saves a lot of manpower
The magnetic stirring system adopts special permanent magnet materials and unique processing technology, which will never fade
The maximum stirring speed will not be less than 980rpm within the life span of the fermentation tank, and it can also reach the maximum speed in high viscosity media
The full-automatic setting control range is 50~1000rpm ± 5rpm
Ventilation control: manual control, flowmeter display
Including rotor flowmeter and imported filter membrane air sterilization filter, with filtration accuracy up to 0
02 μ m 
Temperature control: jacket water bath electric heating, automatic control, temperature control cooling water temperature +5 ℃ ~65 ℃ ± 0
2 ℃  
Foam control: full automatic PID measurement and control and alarm, peristaltic pump automatically adds defoamer  
Feeding control: PID fully automatic setting peristaltic pump switch control, automatic feeding and metering
PH control: Mettler electrode imported from Switzerland (compatible with high-quality domestic electrode), peristaltic pump automatically adds acid and alkali, accurately controls pH, display range: 0
00~14
00 ± 0
01, full-automatic control range: 2
00~12
00 ± 0
05 
Do control: the original imported Mettler electrode from Switzerland (compatible with high-quality domestic electrode) is used for correlation control with speed (air flow, feeding, etc
) with 0-150 ± 3% display accuracy of 0
1% 
Pressure control: manual control (automatic control optional), instrument display  
Control system: biotech-2002 biological process controller and biotech-fcs fermentation monitoring software can be used for a single tank, so that you can not only observe the fermentation changes on site, but also remotely monitor the fermentation process; If multi connected or multi-stage fermentation tank is used, biotech-3000/6000/8000/9000 biological process controller can be used to realize more measurement and control functions
(for more control functions, please refer to the introduction of relevant biological process controllers and fermentation monitoring software)  
Scalable functions:
Automatic detection and control of air flow, tank pressure and liquid level  
Exhaust O2 and CO2 detection  
Two ways of feeding can be added, and the electronic balance weighing system can be added