1、 Product introduction: VAF copper plated grounding rod is made of 99
95% pure electrolytic copper molecules uniformly attached to the low carbon steel core
This process ensures the permanent molecular connection between the copper layer and the steel core
With good conductivity and corrosion resistance, it can effectively use the deep low soil resistivity to reduce the grounding resistance, and can ensure the service life of the product over 30 years
At the same time, the tensile strength is up to 600n/mm2, which is suitable for deep installation, and will not crack or fall off when driven underground
2、 Product features: 1
Perfect continuous combination of copper molecule and steel rod: the steel rod is cold drawn from the solid core, first plated with a layer of nickel, and then plated with copper with the same thickness on the nickel layer
Since nickel has good bonding performance with copper and steel, the perfect combination of copper layer and steel core is ensured
2、 The copper is perfectly combined with the steel core, and no holes are found on the surface of the copper layer by using a 25X magnifying glass
3
Superior anti-corrosion performance, thick copper layer on the surface (average thickness ≥ 0
254mm), strong corrosion resistance, expected service life of more than 40 years, reducing the labor intensity and cost of overhaul and maintenance
4、 It has good electrical performance, and the excellent conductivity of the surface red copper material makes its own resistance value far lower than that of the conventional material
5、 It has a wide range of applications
This product can be used for grounding construction under different humidity, temperature, pH value and resistivity changes
6、 The construction is convenient and fast
It can be constructed manually or mechanically
The minimally invasive operation greatly improves the construction efficiency
7、 High strength, suitable for deep drilling more than 35 meters underground
The copper layer does not break or fall off, so as to meet the requirements of low resistance value in special occasions
8、 The construction cost is low
Compared with the traditional construction method of pure copper grounding rod and grounding strip, the cost is greatly reduced
(moreover, the strength of the pure copper grounding rod can not be achieved
) III
product related tests: 1
Adhesion test: cutting with a lathe, cutting from the copper plated steel surface to the inside, making it 1mm smaller than the original diameter, turning it enough to expose the copper layer and the through rod, and the outer copper layer is not stripped
2、 Bending test: the length of the sample is 40 times the diameter of the copper plated steel, and the sample is clamped in a vice to bend for 30°, The copper layer shall be free of peeling and wrinkles
3、 Tensile test: the tensile strength of copper plated steel bar is up to 600n/mm2 Lightning rod | early discharge lightning rod | optimized lightning rod | imported lightning rod | spherical lightning rod | ordinary lightning rod | pure copper lightning rod | pre discharge lightning rod | resistance reducer | lightning grounding resistance reducer | physical resistance reducer | grounding module | graphite grounding module | lightning grounding module | non metal grounding module | low resistance grounding module | copper clad steel grounding electrode || copper clad steel grounding rod | bus copper bar | zinc clad steel grounding electrode | electrolytic ion grounding electrode | electroplated copper grounding rod | copper clad steel winch Wire | grounding strand | exothermic melting mold | exothermic flux | lightning tower | tower | decorative lightning tower | lightning protection device | lightning protection system | power supply lightning protection | network lightning protection | signal lightning protection | monitoring lightning protection | grounding resistance reduction | lightning protection grounding | lightning protection measures | lightning protection design | lightning protection scheme | lightning protection engineering services |
Contacts
- Company Name
- Guangxi fu'anfu Power Equipment Co., Ltd
- Name:
- Mr. Huang Lei
- Q Q
- 2979911318
- Telephone
- 0771-3863212
- Mobile
- 18977165935
Address
- Operational Address
- No. 1-3, xiu'an Road, XiXiangTang District, Nanning, Guangxi
Find Similar Products By Category
premiumexporter.com温馨提示
本网页所展示的有关【Electroplated copper-clad steel grounding electrode】的信息/图片/参数等由的会员【Guangxi fu'anfu Power Equipment Co., Ltd】提供，由premiumexporter.com会员【Guangxi fu'anfu Power Equipment Co., Ltd
】自行对信息/图片/参数等的真实性、准确性和合法性负责，本平台（本网站）仅提供展示服务，请谨慎交易，因交易而产生的法律关系及法律纠纷由您自行协商解决，本平台（本网站）对此不承担任何责任。您在本网页可以浏览【Electroplated copper-clad steel grounding electrode】有关的信息/图片/价格等及提供【Electroplated copper-clad steel grounding electrode】的商家公司简介、联系方式等信息。
在您的合法权益受到侵害时，请您致电，我们将竭诚为您服务，感谢您对premiumexporter.com的关注与支持！
|
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details