Dongyang 16m bridge inspection car rental, Yongkang 18m bridge inspection car rental

Dongyang 16m bridge inspection car rental, Yongkang 18m bridge inspection car rental Tel
: 180-6251-5888 Yongkang has a complete range of 18 meter bridge inspection vehicles for rent
It specializes in providing bridge inspection vehicles with heights of 14 meters, 16 meters, 18 meters, 20 meters, 21 meters and 22 meters
There are outlets all over the country
If you need, we can transfer cars nearby to provide you with vehicles more conveniently and quickly, so that you can save time, labor and worry
24-hour online service is available all day
You are welcome to inquire Dongyang 16m bridge inspection vehicle rental bridge maintenance and reinforcement construction technology: 　　1
Reinforcement method of bridge deck reinforcement layer A layer of reinforced concrete is paved on the top of the beam
Generally, the old bridge deck is chiseled out first to form an integral with the original main beam, so as to increase the effective height of the main beam and the transverse distribution capacity of the bridge load, so as to improve the bearing capacity of the bridge 　　2
Increasing section and reinforcement method When the strength, stiffness, stability and crack resistance of the beam are insufficient, the reinforcement method of increasing the member section, reinforcement and reinforcement ratio is usually adopted
This method is to increase the size at the bottom or side of the beam, increase the main reinforcement, and improve the effective height and flexural strength of the beam, so as to improve the bearing capacity of the bridge
This method is widely used in the reinforcement of bridges, arch bridges and arch ribs 　　3
Anchor shotcrete reinforcement method With the help of high-speed spraying machinery, the new concrete mixture is continuously sprayed onto the sprayed surface of the anchored reinforcement mesh, and the solidified and hardened surface forms reinforced concrete, so as to increase the stress section and reinforcement of the bridge, strengthen the integrity of the structure and make it able to bear greater external load 　　4
Bonded steel plate reinforcement method When the traffic volume increases and the main beam has insufficient bearing capacity or corrosion, the main beam of beam slab bridge will have transverse cracks
The adhesive and anchor bolt are used to paste and anchor the steel plate on the tensile edge or weak part of the concrete structure to form an integral part with the structure, and the steel plate is used to replace the additional reinforcing steel bar to improve the bearing capacity of the beam