Dongguan sales Saint Gobain tf1877 / 1879 thermal conductive silicon film green

  Saint Gobain thermal conductive silicone coated fabric:
Saint-GobainThermaCool® Tf1870 / 1879 series are thermally conductive silicone coated fabrics with high temperature performance and consistency of heat dissipation gaskets
Glass fiber fabric supports thermal conductive silicone rubber impregnation to increase dimensional stability and cutting resistance
The thin cross section keeps the thermal resistance low, saves space and provides electrical isolation

ThermaCool® Tf1870 / 1879 properties:
Color: Green
Thickness: 7
5mil 9mil（0
19mm  0
229mm）
Thermal conductivity: 1
2w/mk
Thermal resistance: 0
23 & deg; C in2/W  0
29° C in2/W
Breaking strength: 100psi
Extension rate: & lt; 5%
Dielectric strength: 3000 three thousand and five hundred
Volume resistivity: 1 x 1014ohm cm
Continuous service temperature: - 80 & deg; F to 400° F (-62°C to 204°C)
Flame retardant grade: UL-94 (V-O)
The tf1870 / 1879 series is specifically designed to provide the following functional benefits:
The thermal conductivity is 1
2w/mk (high thermal performance) Mica and grease methods reduce assembly time by 70% or more Optional pressure sensitive adhesive, easy to manufacture The UL list simplifies the certification of completed electronic systems (94 V-0) Non toxic, can improve safety and reliability Total performance range from standard to high end Electrically isolate the power supply from the heat sink
Material specification and size:
Standard thickness: 0
0075 and 0
009 inches (
19 and
22 mm)
Main roll size: 36 inches x 36 yards
(914mm x 33m)
quality guarantee period
10 years after the production date, with 95 & deg; The temperature of F (35 & deg; c) is stored in the original packaging
70% relative humidity
 
Material application:
• Telecom & bull; Automotive Electronics & bull; Electrical insulation & bull; Power module device / Equipment & bull; Military & bull; Computer & bull; medical care
Important note:
• Since Saint Gobain cannot predict or control all potential applications, we strongly recommend that you test this product
Under individual application conditions prior to commercial use& bull; For PSA option, the surface must be clean and free of oil, grease, moisture, dust and dirt
Isopropyl alcohol is good for cleaning surfaces& bull; The recommended temperature of the base cloth is - 80 DEG; F to 400 & deg; F (- 62 & deg; C to 204 & deg; c)