DN15 / 20 / 25 plexiglass jet ejector transparent water ejector plexiglass Venturi

  Water ejector, also known as jet ejector, is composed of nozzle, suction chamber and diffuser
For a gas dosing system, the work of the ejector system is very important
If the ejector model is incorrect or there is a fault, any component in the system will not work
The basic requirement of the system is to correctly select the type of ejector and use the ejector correctly
The ejector system consists of the following parts: ejector, operating water source of ejector, vacuum pipeline from ejector to gas feeder, and ejector discharge system
Ejector function, operation, structure and hydraulic conditions
The ejector has two important functions: generating the vacuum required for work and generating solution
The ejector is to form a vacuum state in the pipeline, so as to push the side end of the tee under the action of atmospheric pressure, but the pressure difference between the inlet and outlet must be more than 0
2MPa
Water ejector: the water ejector is an air extraction element designed according to the jet principle
When the power water passes through the water ejector, its internal negative pressure is generated, and the external gas is sucked into the water ejector under the action of differential pressure, so as to realize air suction
The inhaled chlorine dioxide is mixed with water here to form a liquid
The water ejector shall be installed indoors to avoid direct sunlight
The working environment temperature of the equipment shall be 5 ℃ - 40 ℃
The water ejector shall be equipped with pressure water source with pressure of 0
2MPa & mdash; 0
4MPa。