Conveyor belt and load supporting device of idler a-belt feede

  For more product information, please call 18053757353 (same as wechat) buffer roller
1
There is a groove in the middle of the idler, which is matched with the reinforcing rib of the strong flame-retardant steel wire belt of the a-belt feeder to effectively prevent the belt from running away, thus ensuring the normal use of the whole machine, prolonging the service life of the equipment and reducing the maintenance cost  
  2
The external double seal bearing is set
The belt a feeder adopts the external double seal bearing to facilitate maintenance and prevent water, coal dust and other sundries from entering the internal corrosion bearing, extending the service life of the idler and reducing the maintenance cost  
  3
The buffer idler support is set, which can alleviate the impact of coal and gangue on the idler, prevent the idler from bending, deformation and fracture due to impact, and reduce the maintenance cost
Jining Dongda electromechanical Co
, Ltd
  Zhangqingyuan   18053757353 (same as wechat) 0537-3153753
  The idler is the support device for the conveyor belt and cargo load of the a-belt feeder
The idler rotates with the running of the conveyor belt to reduce the running resistance of the conveyor
The quality of the idler depends on the use effect of the a-belt feeder, especially the service life of the conveyor belt
The maintenance cost of idler has become an important part of the operating cost of belt conveyor
Therefore, the idler is required to be reasonable in structure, durable, with small rotation resistance coefficient and reliable sealing
Dust and pulverized coal cannot enter the bearing, so as to reduce the running resistance of the conveyor, save energy and prolong the service life
The idler is installed at the position below the guide chute, and the material falls onto the nail belt, which has impact load on the nail belt and belt
In order to protect the nail belt and belt, a buffer idler is installed at this position
Buffer idler is to install the idler on an elastic support to cushion the impact of materials

Jining Dongda electromechanical Co
, Ltd
produces belt coal feeders with 20 years of production experience
It has been elaborately researched, developed and produced
GLD series belt coal feeders (divided into belt and belt a, coal safety certificate No
: mcn10003, mcn10004,) are widely used for coal feeding in various coal silos in coal, metallurgy, electric power and other industries
It is a rotating continuous coal feeding mode, During production, the user can adjust (manual adjustment or hydraulic cylinder adjustment) without stopping the machine as required, so that the coal feeding system can better meet the requirements of high efficiency, energy saving and environmental protection
It is an updated product of reciprocating coal feeder and vibrating coal feeder

Model   Coal feeding amount t/h  Power kw  Band speed   m/s  Machine weight   kg
GLD800/5
5  800  5
5  0
75  three thousand and five hundred
GLD2200/7
5  2200  7
5  0
98  four thousand and one hundred
GLD3300/7
5  3300  7
5  0
98  five thousand
GLD4000/11  4000  11  1
00  five thousand and five hundred
 
For more product information, please call 18053757353 (the same as wechat)
Contact: zhangqingyuan
Mobile: 18053757353
Tel: 0537-3153753
QQ: 3337474419