Continuous casting cutting gas filte

  Filter for continuous casting and cutting:
summary
Coke oven gas (blast furnace gas) in continuous casting and cutting contains not only a certain amount of water, but also other residual impurities such as fine particles, suspended solids and tar after compression by piston compressor
The existence of these impurities will affect the whole continuous casting cutting system (solenoid valve, flasher, cutting nozzle, etc
) are blocked
After working for a short time, it is necessary to clean the pipeline, control system and cutting nozzle
During the cleaning period, it is necessary to manually cut the continuous casting billet
The high-temperature working environment is very bad
In order to completely improve the phenomenon of frequent replacement of cutting nozzle, consider reducing the failure rate and control the problem of gas cleanliness from the source The problem is imperative Hebei Zhongtai Filter Equipment Co
, Ltd
has started to develop filter materials suitable for continuous casting and cutting
Taking the continuous casting and cutting line of Xingtai Iron and Steel Group as the experimental base, it has accumulated experience of many failures, continuously improved the filter structure and filter material structure, independently developed a set of high-precision filter materials suitable for continuous casting and cutting of coke oven gas, and made a major breakthrough in Xingtai Iron and steel, Later, the energy-saving cutting nozzle produced by Jiangxi Jianguang Energy Saving Technology Co
, Ltd
is adopted
This cutting nozzle is a narrow slit energy-saving cutting nozzle, which has more strict requirements on the cleanliness of gas, otherwise the service life of the cutting nozzle will be seriously reduced and frequent replacement will occur
The 12-month experiment shows that, The energy-saving narrow slit cutting nozzle has never been blocked (except for normal consumption)
It completely solves all the adverse consequences of continuous casting cutting caused by the impurity in gas from the source
 
Parameters:
Filter model: zt-mq-300 series
Suitable place for filter: continuous casting and cutting gas pipeline
Filter material: Q345R
Total weight of filter: 100kg
Filter form: coalescing tar and naphthalene removal
Filter inlet and outlet nozzle size: DN32 \ 40 \ 50
Filter flange standard: dn32-wn-pn1 6-RF-B(20592)
Quantity of filter elements installed inside the filter: 4 pieces
Filter element model: zt-mq-300-32lx
Filter element category: composite vacuum sintered material
Filter element accuracy: 0
1 micron
Design pressure of filter element: PN1 6swd
Design service life of filter element: 5000h
Filter element connection type: flat pad compression type
Pollution carrying capacity of single filter element: 5kg
Filter type of filter element: in and out
Low in high out

Specification of filter drain outlet: ZG25
Filter inlet and outlet design pressure gauge: Yes
Pressure gauge specification: 60-pn1 six
　
Filter element model: zt-mq-300-32lx
Chinese product name: special filter element for gas tar removal
Basic unit: Branch
Budget price:
Unit weight: 2kg
Unit weight: kg
Filtration accuracy: 0
1 micron
Filtering area: 6m2
Material; Composite vacuum sintering of stainless steel and glass fiber
Size: 108 * 450
Pervious rate:
Treatment method; Coalescence
Temperature: within 100 ° C
Filter medium: gas
Replacement cycle: 12 months