Classification and introduction of xinwangfeng windproof and dust suppression net

  Type I of wind and dust suppression net: flexible wind and dust suppression net single layer net: Factory width 2-5M, processing unlimited width and unlimited extension of length
Double layer mesh: the factory width is 2-5M, which can be processed with unlimited width and unlimited length
Type 2: the single peak (monomer) forming width of the steel wind and dust suppression net is between 250mm-500mm, the peak height is 50mm-100mm, and the length is within 6m
The forming width of double peak type (double body) is between 400mm-600mm, the peak height is 50mm-100mm, and the length is within 6m
The forming width of three peak type (TRIAD) is 810mm, 825mm, 860mm, 900mm, etc
, the peak height is 50mm-80mm, and the length can be processed within 6m
The plate thickness is 0
5mm-1
5mm
It is concluded that the longer the wind proof net is, the better the wind proof effect will be
The longer the wind proof net is, the better the wind proof effect will be
Due to the different geographical environment and meteorological conditions, different specifications and models of wind and dust suppression walls should also be used to achieve the effect of effective wind and dust prevention
It needs to be designed by professionals to ensure the durability and environmental protection effect of the wind and dust suppression wall
Principle of windproof and dust suppression net windproof and dust suppression net is a combined windproof and dust suppression wall processed into a certain geometry, opening rate and different hole shapes based on the aerodynamic principle and the results of on-site environmental wind tunnel experiment, so that when the circulating air (strong wind) passes through the wall from the outside, the upper and lower interference airflow will be formed on the inner side of the wall, so as to achieve strong wind on the outside, weak wind on the inside and small wind on the outside, There is no wind on the inner side, so as to prevent the flying of dust
At present, this technology is in a * position in China
The wind and dust suppression wall is composed of independent foundation, steel structure support and wind shield plate