Chongqing national standard floor paint sales manufacture

Guanpai floor paint (manufacturer sales: 199 ◇ 2310 ◇ 0068); Chongqing national standard floor paint, Chongqing national standard floor paint wholesale; According to customer needs & mdash; Customize various colors; Crown brand national standard floor paint has the functions of dust-proof, wear-resistant, pressure resistant, water-proof and anti-corrosion; It can be used for matte, bright, semi dumb and anti-skid; Specification of packing barrel: 20kg / barrel Floor paint type: floor paint - common epoxy resin sealing primer & mdash; Colorless (good permeability; excellent alkali resistance); Epoxy resin topcoat & mdash; Common green colors (decoration protection, etc
); grey Blue; Other colors can also be customized;) Indoor floor paint & mdash; Warehouse floor paint - Phenolic floor paint (one component paint - good construction performance & mdash; dust prevention; decoration, etc
)
Outdoor floor paint & mdash; Acrylic floor paint & mdash& mdash; Good weather resistance; Excellent wear resistance Construction process: 1 Plain ground treatment: the ground shall be subject to the cement surface or stone ground
The ground shall be kept for more than 28 days, and the water content shall be less than 8%
If the ground is uneven or empty, it shall be removed first, and the ground shall be leveled with epoxy mortar
The oil stain on the ground shall be cleaned, and the ground shall be kept dry and clean before construction
2
Ground treatment: Polish, repair, decontaminate and remove dust according to the ground conditions; 3
Epoxy primer: roll one layer of epoxy primer with strong permeability and adhesion to enhance surface adhesion; 4
Epoxy mortar: add an appropriate amount of quartz sand with epoxy two-component and apply it with a trowel to reach the required number of layers; 5
Epoxy putty: add an appropriate amount of epoxy two-component putty powder, and evenly apply it for one or two courses with a trowel to increase the flatness of the ground; 6
Epoxy paint: roll coat one or two layers of epoxy paint; 7
Epoxy topcoat: roll one layer of epoxy topcoat to make the ground bright and wear-resistant Reasons for peeling and cracking of floor paint: coating cracking, peeling and peeling: due to poor adhesion and bonding between coatings, there are pathological phenomena such as coating peeling, peeling, bulging and peeling

Causes: improper selection of materials, resulting in poor adhesion between foundation layers; The bottom and surface coatings are not matched, resulting in poor adhesion between layers; The foundation surface is unclean, with oil, water or other dirt; Improper foundation treatment; Construction temperature is too low; If the bottom layer is not completely dry, the next process shall be constructed, and the shrinkage rate of the bottom layer surface layer is inconsistent, resulting in cracking, thus affecting the adhesion between layers

Solution: select matching primer and surface coating; During foundation surface treatment, oil stain, water or other pollutants shall be removed; The foundation shall be polished, trimmed and then scratched; The primer can be applied only after it is completely dry and polished to increase the adhesion between layers; Timely maintenance The above content comes from the Internet and is only used for display
The copyright belongs to the original author; If you feel unwell, please let us know and we will delete it as soon as possible