Chlorinated rubber anticorrosive paint damp proof industrial chlorinated rubber paint for cooling to

  Product Description: chlorinated rubber topcoat has good outdoor weather resistance, corrosion resistance, acid and alkali resistance, salt spray resistance and aging resistance
Before the popularity of acrylic polyurethane paint, chlorinated rubber topcoat was used as the main weather resistance and anti-corrosion topcoat in the fields of bridge, container, vehicle coating and so on

With the improvement of environmental protection requirements, a large amount of VOC is generated in the production process of chlorinated rubber paint, which has been gradually stopped in Europe and America
The development and popularization of high-performance paints such as acrylic polyurethane paint and fluorocarbon paint quickly filled the traditional market of chlorinated rubber paint

Product application
It is applicable to the anti-corrosion of wharf, ship, water steel structure, oil tank, gas tank, pipeline, chemical equipment and plant steel structure, as well as the decorative protection of concrete surface of wall, pool and underground corridor
It is not suitable for the environment in contact with benzene agents

Customized instructions
Chlorinated rubber finish color
The color of the paint can be according to the paint color card, ral color card and GSB national standard color card
The color number of medium solid color paint shall be determined

Construction and supporting requirements:
Customized chlorinated rubber finish is the main construction methods to be informed: air spraying, airless spraying, roller coating, brush coating, electrostatic spraying, etc
, so as to adjust the formula to suitable construction

When chlorinated rubber finish is used as anti-corrosion finish, it must be matched with corresponding primer
At present, epoxy primer is mainly recommended as matching primer for steel, cement and other surface coatings

 
Product 2:
1、 Chlorinated rubber finish performance;
It has good heat resistance, acid and alkali resistance and mechanical and physical properties;
It has excellent low-temperature construction performance and can be constructed in the environment of - 20 ℃ ~ 50 ℃+
The paint film has good adhesion to steel;
The paint film layer is mutually dissolved into one, with excellent interlayer adhesion
Old chlorinated rubber paint
2、 Application of chlorinated rubber finish: the paint is suitable for steel surfaces working below temperature and heat-resistant and anti-corrosion protective coatings of parts
It can also be used for corrosion prevention of ships, seaports, docks, offshore platform steel structures, petroleum and chemical pipelines, equipment outer walls and other steel structures
Chlorinated rubber topcoat, as a supporting paint, is suitable for steel structure, metallurgy, bridge, chemical equipment, etc
Fast drying, several times faster than that of oily paint;
3、
construction reference of chlorinated rubber finish:
1
The sprayed steel surface must be polished with fine sandpaper for rust removal, and the oil dirt and dirt shall be wiped off with toluene and other solvents for thorough oil and rust removal
In particular, sand blasting treatment is adopted to make the sprayed surface gray white

2
The chlorinated rubber finish must be prepared in proportion and stirred evenly before use
If foreign impurities are mixed, it should be filtered and used
If the amount of one-time use is small, how much should be used,
To prevent excessive curing and waste

3
During spraying, if the paint is too thick, it must be diluted with special thinner to the required consistency before construction
The film thickness is generally between 20-30 microns