Byt1-320z / 12 electric hydraulic thruster Jiaozuo manufacture

  6
2
5 when the pusher is working, the Zui lower end of the piston shall be kept at a certain distance from the cylinder bottom (generally not less than 5mm), otherwise the normal operation will be affected
7、  Use and maintenance
7
1 before use, it shall be checked according to Article 6
1
After it is correct, it can be put into use

7
2 regularly check whether the pusher works normally and whether there is oil leakage, and maintain a certain amount of oil

Warning: oil sump is strictly prohibited
, Once oil spill or oil leakage is found, it must be handled immediately

7
3 check the oil every six months
When the oil deteriorates or is mixed with sundries, change the oil (see article 6
1
2)

8
Storage and transportation
8
1 when storing the pusher, it shall be kept dry to prevent moisture and sharp change of ambient temperature

8
2 during transportation, it is necessary to prevent rain and do not use rope to cover the push rod for transportation