Byt1-180z / 12 electric hydraulic thruster manufacturer wholesale

  6
1
4 when the installed pusher acts, it shall be ensured that the pusher can swing as a whole, and the push rod is not allowed to bear radial force
6
1
5 the thruster shall be equipped with qualified motor with explosion-proof certificate

6
1
6 when wiring the thruster motor, carefully compare the wiring with the motor nameplate

6
1
7 the diameter of the incoming cable of the motor shall be consistent with the hole of the rubber pad to ensure that there is no gap between the silicone rubber pad and the cable and outlet, otherwise the flameproof performance will be lost

6
1
8 the pusher is equipped with a grounding screw, and the user shall be grounded according to relevant regulations
Do not open the cover with electricity!!!
6
2 use of pusher
6
2
1 check according to Article 5
1 before use
After it is correct, it can be put into use

6
2
2 regularly check whether the pusher works normally and whether there is oil leakage, and maintain a certain amount of oil

6
2
3 check the oil every six months
When the oil deteriorates or is mixed with sundries, change the oil (see article 5
1
2)

6
2
4 according to the temperature of surrounding medium, it is recommended to select hydraulic oil according to the following table: