Bulge of webbing edge

It is normal for the edge of synthetic fiber webbing to bulge, because all polyester webbing is woven at one time by our webbing weaving machinery
No matter what kind of stripe pattern is woven, it is formed by crossing diameter lines and inserting weft lines
This also causes the phenomenon of fracture if the thickness of a single diameter line at the edge of the webbing of the flat lifting belt is equal to the thickness of the middle diameter line of the webbing
Under normal circumstances, the weaving of polyester webbing can be completed only when the thickness of a single diameter line at the edge of polyester webbing is greater than that of the conventional diameter line
However, the result is that the edge of the finished webbing will be slightly raised

The polypropylene industrial yarn used at the edge of polypropylene ribbon will break when weaving the ribbon
Firstly, the industrial yarn at the edge of loom carries the strength of weft weaving back and forth
Therefore, if the bearing capacity is not relieved by increasing the thickness of a single filament of the edge diameter line of the loom, the polypropylene filament at both ends of the webbing will be broken all the time
At this time, it will not only affect the output of the webbing manufacturer, but also affect the quality of the finished webbing

Therefore, if you want to better weave the lifting belt webbing, in addition to the technical personnel debugging the webbing machine, you also need to pay attention to appropriately increase the thickness of the diameter line at both ends of the polyester webbing when weaving the webbing, so as to avoid losses caused by not knowing the weaving skills
Starting from understanding, Hebei Jili rigging Co
, Ltd
is willing to become your database

Lifting belt http://www
jiliqizhong
com/
White sling http://www
jiliqizhong
com/chanpin/webbing%20slings/
Tensioner strap http://www
jiliqizhong
com/chanpin/shuanjinqijinshujian/
Sling manufacturer http://www
jlrigging
com/