Application method of large rock hydraulic splitting machine

  The principle of Hairun large-scale rock hydraulic splitting machine: it uses the characteristics that the tensile strength of the rock is far lower than the compressive strength, and applies the principle of wedge block to put the wedge module of the splitting machine into the borehole
The rock is too hard to be broken by the hydraulic hammer, so that the rock structure can not be broken from the inside to the outside
Unparalleled splitting destructive force (24MPa hydraulic power can produce 3600 tons of splitting force), not affected by the environment, stable performance, simple and pollution-free operation
It is the supreme choice of the current hydraulic splitting machine
Farun large rock splitting machine has traditional technical advantages and sophisticated manufacturing technology, which can adapt to various harsh working conditions
Farun large rock splitting machine (also known as splitting machine or rock splitting machine) is mainly composed of oil cylinder, piston rod, control valve, oil pipeline, wedge, etc
it is installed on the excavator and takes the excavator's own hydraulic system as the driving source, Only the pressure of 24MPa (240kg / cm2) can produce 2600-3600 tons of splitting force (at present, a domestic equipment that has reached this technical parameter through market inspection)
According to the destructive test data, on the rock with Mohs hardness greater than 7, the demolition efficiency of the splitting machine is more than 5 times that of the crushing hammer
The rock crushing in the foundation pit of modern buildings is faced with the problems of no blasting, too hard rock and low efficiency of crushing hammer
The combined operation of drilling machine, Hairun large rock splitting machine and crushing hammer is not only a good solution, but also a good equipment combination to save cost and improve operation efficiency
If this joint operation mode is adopted for a large earthwork project, the profit will increase by more than 10 times
This operation mode has entered the field of Engineering demolition strongly
It is an excellent equipment to save cost and improve operation efficiency

General demolition methods: 1
Manual demolition 2
Demolition by crushing hammer 3
Cement expansion agent 4
Static blasting 5
Air pick 6
Negative environment of hydraulic splitting machine: 1
Narrow space; 2
Load bearing requirements 3
Large vibration is prohibited; 4
Underwater; Objective requirements: 1
Time requirements; 2
Social requirements; 3
Economic requirements; 4
Manpower requires that all demolition methods have objective conclusions, which I will not repeat here
The new large-scale rock splitting machine, also known as airborne splitting machine, is driven by the hydraulic system of the loader, which fully realizes the full automation, full hydraulics and efficient operation
Height of airborne splitting machine: 3M; Weight: 550 kg; Gun head length: 1
5m, drilling depth: 2m
Diameter: 10 cm

Splitting force: 3800 tons, one-time cracking, 10-20 cubic meters
The rock surface with a large amount of broken stones is 2 meters away from the flying surface, the plane fracture is 3
54 meters, and the vertical depth is 5 meters

 
Have you encountered the following problems?
1: There are buildings around the project, which cannot be blasted
What if the efficiency of the crushing hammer is too slow?
 
2: The rock is too hard to be solved by other rock splitting techniques?
 
3: The splitting force of other hydraulic splitting machine equipment in the same industry is too small and often fails, which affects the efficiency

 
If you have the above questions, don't hesitate to choose our Hairun brand super large rock splitting machine!