3266 anti oil and anti-static filter element

  The dust removal filter cartridge has the characteristics of acid-base resistance, corrosion resistance, strong explosion-proof performance, large filtering area, oil-proof and waterproof, high filtering efficiency, large processing air volume, high strength, large tension, strong wear resistance, high filtering accuracy, small operating resistance, low friction coefficient, strong non stick powder performance, good moisture-proof and moisture-proof performance, repeated water washing, improving the quality and output of powder materials, etc
Performance of air filter element the engine needs to absorb a large amount of air during operation
If the air is not filtered, the suspended dust in the air will be sucked into the cylinder, which will accelerate the wear of piston group and cylinder
Larger particles entering between the piston and the cylinder will cause serious & ldquo; Cylinder pulling & rdquo; This is especially serious in dry and sandy working environment
The air filter is installed in front of the carburetor or intake pipe to filter dust and sand in the air and ensure sufficient and clean air in the cylinder
The filter element of special dust removal filter on the warehouse top of WAM mixing plant in weiem, Italy, has quality assurance
Welcome to consult and negotiate
(the filter element is complete with plastic cover, Pu rubber cover and three lug iron cover) WAM filter element part No
2099a9s-a, 2099a9r-a, 2099a9w-ac013ppov, 20646694a
Its principle is to design the filter element of the dust collector according to the passing aperture of various powdery substances such as cement, fly ash, stone powder, mineral powder and chemical powder, and the influence of the maximum diameter and adhesion on the aperture of the filter element, It can fully meet the filtration requirements of various powdery substances
It can not only meet the requirements of air supply of bulk vehicles and air supply after disassembly of finished products, but also ensure that there is no negative pressure in the warehouse when powder substances are used
The filter area is 24m2, the volume is small, and the filter element is made of filter material imported from Germany for vibration cleaning
The ventilation filter element and assembly have been installed and tested
The technical parameters of 2099a9w-a wiem plastic cover dust removal filter element are as follows: filtering area: 18 / 24 square meters, processing air volume: 1433
48l/min, filtering efficiency: 99% filter element consumption: 7 / 9 / 12 / 14 pieces
Special specifications can be designed, processed, manufactured and produced according to user requirements
Our company can provide filter elements of different materials and different accuracy, In order to meet the filtration requirements of users in various occasions, it has high precision, can handle the recovery of ultra-fine dust, large air volume, can handle the occasions with high filtration wind speed and high dust content, the bonding between the end cover and the filter material adopts imported high-strength epoxy resin, which has high temperature resistance, wear resistance and acid resistance; The material of the sealing ring is very elastic, wear-resistant, air leakage prevention and powder compatibility; Large sewage carrying capacity, long service life, water cleaning, convenient replacement and cost reduction ,